adGenVoipScalarConfLocalOriginatorOnhook
ADTRAN-GENVOIP-MIB ·
.1.3.6.1.4.1.664.5.70.20.1.6.4
Object
scalar
r/w
Enumeration
Specifies the behavior of a three-way conference originator when the port
returns on-hook after the conference has been established.
1 = persist The two remaining parties in the conference are
connected together.
2 = terminate The remaining parties are disconnected.
Context
- MIB
- ADTRAN-GENVOIP-MIB
- OID
.1.3.6.1.4.1.664.5.70.20.1.6.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- adGenVoipScalarProv
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenVoipScalarFlashhookMode Used to determine if flashhook events will be interpreted locally or will
be forwarded to the far end.
1 = interpreted Allows the local unit to interpret flashhook events.
… | scalar | Enumeration | .1.3.6.1.4.1.664.5.70.20.1.6.1 |
| adGenVoipScalarTransferOnHangup Permit Call Transfer on hangup. Default: Enable | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.20.1.6.10 |
| adGenVoipScalarFlashhookThreholdMin Specifies Minimum Flashhook time in Milliseconds. Default: 300 Milliseconds. | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.11 |
| adGenVoipScalarFlashhookThreholdMax Specifies Maximum Flashhook time in Milliseconds. Default: 1000 Milliseconds. | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.12 |
| adGenVoipScalarEmergencyNumberInhibitOnHook Permits enabling or disabling of the ability to go on-hook when connected
to an emergency number.
Permitted values: Inhibit on-hook for users = True(1),
Allow on-hook for users = … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.20.1.6.13 |
| adGenVoipScalarEmergencyNumberRingingTimemout Used to set the maximum interval of time in minutes the phone of the user
will ring after hanging up on the emergency call handler. Default: 10 minutes. | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.14 |
| adGenVoipScalarDefaultSipTrunk Used to set the default SIP trunk for the shelf. This trunk specified by this oid
will be used by voice users that are not explicitly connected to a SIP trunk.
If exactly one SIP… | scalar | OctetString | .1.3.6.1.4.1.664.5.70.20.1.6.15 |
| adGenVoipScalarConnectedTimer Used to set the maximum interval of time in hours the phone can be in the connected state.
Default: 12 hours. Value of 0 indicates the time is unlimited. | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.16 |
| adGenVoipScalarConferenceMode Used to determine if three way voice conferencing bridging will be handled
within the unit or from a far-end conferencing server.
1 = network Conferencing will be handled by… | scalar | Enumeration | .1.3.6.1.4.1.664.5.70.20.1.6.2 |
| adGenVoipScalarConfLocalOriginatorFlashhook Specifies the behavior of a three-way conference originator when a
flashook is received after the conference has been established.
1 = drop The last party added will be drop… | scalar | Enumeration | .1.3.6.1.4.1.664.5.70.20.1.6.3 |
| adGenVoipScalarConfLocalPartyDisconnect Specifies the behavior of a three-way conference after a member
disconnects.
1 = continue The conference is maintained with the remaining parties.
2 = transfer The confe… | scalar | Enumeration | .1.3.6.1.4.1.664.5.70.20.1.6.5 |
| adGenVoipScalarRtpUdpOffset Used to configure a global starting User Datagram Protocol (UDP) port for
Realtime Transport Protocol (RTP). | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.6 |
| adGenVoipScalarSPREMode Used to determine if the SPRE code will be interpreted locally or
sent to the far end for interpretation.
1 = network SPRE code will be interpreted by the far-end switch.
… | scalar | Enumeration | .1.3.6.1.4.1.664.5.70.20.1.6.7 |
| adGenVoipScalarInterdigitTimer Used to set the maximum interval between two consecutive digits dialled
by the user in seconds. Default: 4 seconds. | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.8 |
| adGenVoipScalarAlertingTimer Used to set the maximum interval a phone can be set in the ringing state
in minutes. Default: 0 minute - will continue ringing indefinitely. | scalar | Integer32 | .1.3.6.1.4.1.664.5.70.20.1.6.9 |