adGenVdsl2VturCircuitCapabilities

ADTRAN-GENVDSL2-LINE-MIB · .1.3.6.1.4.1.664.5.65.1.2.3.1.15

Object

column OctetString

Returns remote circuit capabilities in bit masks with following order:
0 - Disabled, 1 - Enabled
Byte Order of octet string:
Byte 0. Byte 1. Byte 2. Byte 3. Byte 4. Byte 5. Byte 6. Byte 7
              
Byte 0: Bit 2 - G992.1 Annex A (Full Rate ADSL over POTS)
        Bit 4 - G992.1 Annex B (Full Rate ADSL over ISDN)
        Bit 6 - G992.1 Annex C (Full Rate ADSL in TCM-ISDN)
Byte 1: Bit 0 - G992.2 Annex A/B (Lite ADSL Over POTS/ISDN)
        Bit 2 - G992.2 Annex C (Lite ADSL in TCM-ISDN)
Byte 2: Bit 2 - G992.3 Annex A/L (ADSL2 over POTS)
        Bit 4 - G992.3 Annex B   (ADSL2 over ISDN)
Byte 3: Bit 0 - G992.4 Annex A   (ADSL2 Lite Over POTS)
        Bit 4 - G992.3 Annex I   (All Digital ADSL2 (POTS))
        Bit 6 - G992.3 Annex J   (All Digital ADSL2 (ISDN))
Byte 4: Bit 0 - G992.4 Annex I   (All Digital ADSL2 Lite)
        Bit 2 - G992.3 Annex L Mode 1 Wide Upstream (RE-ADSL2 Over POTS)
        Bit 6 - G992.3 Annex M   (Double Upstream ADSL2)
Byte 5: Bit 0 - G992.5 Annex A   (ADSL2+ over POTS)
        Bit 2 - G992.5 Annex B   (ADSL2+ Over ISDN)
        Bit 6 - G992.5 Annex I   (All Digital ADSL2+ (POTS))
Byte 6: Bit 0 - G992.5 Annex J   (All Digital ADSL2+ (ISDN))
        Bit 2 - G992.5 Annex M   (Double Upstream ADSL2+)
Byte 7: Bit 0 - VDSL2 (North America)
        Bit 1 - VDSL2 (Europe)
        Bit 2 - VDSL2 (Japan)

Context

MIB: ADTRAN-GENVDSL2-LINE-MIB
OID: .1.3.6.1.4.1.664.5.65.1.2.3.1.15
Type: column
Access: readonly
Status: current
Parent: adGenVdsl2VturPhysEntry
Table: adGenVdsl2VturPhysTable
Siblings: 20

Syntax

OctetString

Values & Constraints

Object Constraints

range: 8-8

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adGenVdsl2VturInvSerialNumber The vendor specific string that identifies the vendor equipment.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.65.1.2.3.1.1`
adGenVdsl2VturPrevTxRate The payload rate of the previous successful train.	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.10`
adGenVdsl2VturActTxPsd Actual Power Spectrum Density (PSD) transmitted. The average transmit PSD over the sub-carriers. It ranges from -900 to 0 units of 0.1 dB (Physical values are -90 to 0 dBm/Hz). A…	column	0.1 dB Integer32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.11`
adGenVdsl2VturCurrTxLineRate The line rate, including all payload and overhead rates.	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.12`
adGenVdsl2VturPrevTxLineRate The line rate, including all payload and overhead rates, of the previous successful train.	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.13`
adGenVdsl2VturCircuitProviderCode Returns remote circuit provider code	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.65.1.2.3.1.14`
adGenVdsl2VturCurrTxRateMax Returns max payload rate since last successful train.	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.16`
adGenVdsl2VturCurrTxRateMin Returns min payload rate since last successful train.	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.17`
adGenVdsl2VturLastSraDownshift Returns system uptime of last SRA downshift since last successful train.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.664.5.65.1.2.3.1.18`
adGenVdsl2VturLastSraUpshift Returns system uptime of last SRA upshift since last successful train.	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.664.5.65.1.2.3.1.19`
adGenVdsl2VturInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.65.1.2.3.1.2`
adGenVdsl2VturRtxUsed Specifies whether retransmission is active in the transmit direction.	column	Enumeration	`.1.3.6.1.4.1.664.5.65.1.2.3.1.20`
adGenVdsl2VturRtxEtr Expected throughput rate calculated from combined effect of impulse noise protection against worst-case REIN and worst-case SHINE and overhead from correction of stationary noise …	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.21`
adGenVdsl2VturInvVersionNumber The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed a…	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.65.1.2.3.1.3`
adGenVdsl2CurrDSSnrMgn Noise Margin as seen by this ATU with respect to its received signal in tenth dB.	column	tenth dB Integer32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.4`
adGenVdsl2CurrDSAtn Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.	column	tenth dB Integer32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.5`
adGenVdsl2VturCurrStatus Indicates current state of the Vtur line. This is a bit-map of possible conditions. Due to the isolation of the Vtur when line problems occur, many state conditions like loss of…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.6`
adGenVdsl2VturCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.	column	tenth dBm Integer32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.7`
adGenVdsl2VturCurrAttainableRate Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.8`
adGenVdsl2VturCurrTxRate The payload rate of the last successful train.	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.4.1.664.5.65.1.2.3.1.9`