adGenVdsl2VtucRtxUsed
ADTRAN-GENVDSL2-LINE-MIB ·
.1.3.6.1.4.1.664.5.65.1.2.2.1.20
Object
column
Enumeration
Specifies whether retransmission is active in the transmit direction.
Context
- MIB
- ADTRAN-GENVDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.664.5.65.1.2.2.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenVdsl2VtucPhysEntry
- Table
- adGenVdsl2VtucPhysTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | rtxInUse |
2 | rtxNotInUseForbidden |
3 | rtxNotInUseNotSupportedXTUC |
4 | rtxNotInUseNotSupportedXTUR |
5 | rtxNotInUseNotSupportedXTUCAndXTUR |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenVdsl2VtucInvSerialNumber The vendor specific string that identifies the
vendor equipment. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.2.1.1 |
| adGenVdsl2VtucPrevTxRate The payload rate of the previous successful train. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.10 |
| adGenVdsl2VtucActTxPsd Actual Power Spectrum Density (PSD) transmitted. The average
transmit PSD over the sub-carriers.
It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz).
A… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.11 |
| adGenVdsl2VtucCurrTpsTcStatus Attributes with this syntax are status parameters that
reflect the failure status for Transmission Convergence (TC)
layer of a given data layer interface (data path over a VDSL2
/… | column | Enumeration | .1.3.6.1.4.1.664.5.65.1.2.2.1.12 |
| adGenVdsl2VtucCurrTxLineRate The line rate, including all payload and
overhead rates. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.13 |
| adGenVdsl2VtucPrevTxLineRate The line rate, including all payload and
overhead rates, of the previous successful train. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.14 |
| adGenVdsl2VtucCircuitProviderCode Returns local circuit provider code | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.2.1.15 |
| adGenVdsl2VtucCurrTxRateMax Returns max payload rate since last successful
train. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.16 |
| adGenVdsl2VtucCurrTxRateMin Returns min payload rate since last successful
train. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.17 |
| adGenVdsl2VtucLastSraDownshift Returns system uptime of last SRA downshift
since last successful train. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.664.5.65.1.2.2.1.18 |
| adGenVdsl2VtucLastSraUpshift Returns system uptime of last SRA upshift
since last successful train. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.664.5.65.1.2.2.1.19 |
| adGenVdsl2VtucInvVendorID The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.2.1.2 |
| adGenVdsl2VtucRtxEtr Expected throughput rate calculated from combined effect of
impulse noise protection against worst-case REIN and worst-case
SHINE and overhead from correction of stationary noise … | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.21 |
| adGenVdsl2VtucInvVersionNumber The vendor specific version number sent by this ATU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed a… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.2.1.3 |
| adGenVdsl2CurrUSSnrMgn Noise Margin as seen by this ATU with respect to its
received signal in tenth dB. | column | tenth dB Integer32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.4 |
| adGenVdsl2CurrUSAtn Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU. | column | tenth dB Integer32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.5 |
| adGenVdsl2VtucCurrStatus Indicates current state of the Vtuc line. This is a
bit-map of possible conditions. The various bit
positions are:
Bit 00 : There no defects on the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.6 |
| adGenVdsl2VtucCurrOutputPwr Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence. | column | tenth dBm Integer32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.7 |
| adGenVdsl2VtucCurrAttainableRate Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.8 |
| adGenVdsl2VtucCurrTxRate The payload rate of the last successful train. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.2.1.9 |