adGenVdsl2VtucPerfEs
ADTRAN-GENVDSL2-LINE-MIB ·
.1.3.6.1.4.1.664.5.65.1.3.1.1.5
Object
column
SNMPv2-SMICounter32
Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defects.
Context
- MIB
- ADTRAN-GENVDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.664.5.65.1.3.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenVdsl2VtucPerfDataEntry
- Table
- adGenVdsl2VtucPerfDataTable
- Siblings
- 61
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenVdsl2VtucPerfLofs Count of the number of Loss of Framing failures since
agent reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.1 |
| adGenVdsl2VtucPerfCrc Count of the number of CRC anomolies since agent
reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.10 |
| adGenVdsl2VtucPerfFec Count of the number of FEC anomolies since agent
reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.11 |
| adGenVdsl2VtucPerfValidIntervals The number of previous 15-minute intervals in the
interval table for which data was collected. Given
that <n> is the maximum # of intervals supported.
The value will be <n> unles… | column | Integer32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.12 |
| adGenVdsl2VtucPerfInvalidIntervals The number of intervals in the range from
0 to the value of adGenVdsl2VtucPerfValidIntervals
for which no data is available. This object
will typically be zero except in cases whe… | column | Integer32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.13 |
| adGenVdsl2VtucPerfCurr15MinTimeElapsed Total elapsed seconds in this interval. | column | seconds Unsigned32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.14 |
| adGenVdsl2VtucPerfCurr15MinLofs Count of seconds in the current 15 minute interval
when there was Loss of Framing. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.15 |
| adGenVdsl2VtucPerfCurr15MinLoss Count of seconds in the current 15 minute interval
when there was Loss of Signal. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.16 |
| adGenVdsl2VtucPerfCurr15MinLols Count of seconds in the current 15 minute interval
when there was Loss of Link. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.17 |
| adGenVdsl2VtucPerfCurr15MinLprs Count of seconds in the current 15 minute interval
when there was Loss of Power. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.18 |
| adGenVdsl2VtucPerfCurr15MinEs Count of Errored Seconds during this interval. An Errored
Second is a one-second interval containing one or more CRC
anomalies, or one or more LOS or LOF defects. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.19 |
| adGenVdsl2VtucPerfLoss Count of the number of Loss of Signal failures since
agent reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.2 |
| adGenVdsl2VtucPerfCurr15MinInits Count of the line initialization attempts in the
current 15 minute interval. Includes both successful
and failed attempts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.20 |
| adGenVdsl2VtucPerfCurr15MinSes Count of Severely Errored Seconds in the current 15
minute interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.21 |
| adGenVdsl2VtucPerfCurr15MinUas Count of Unavailable Seconds in the current 15
minute interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.22 |
| adGenVdsl2VtucPerfCurr15MinFecs Count of FEC Seconds in the current 15 minute interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.23 |
| adGenVdsl2VtucPerfCurr15MinCrc Count of CRC anomolies in the current 15 minute interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.24 |
| adGenVdsl2VtucPerfCurr15MinFec Count of FEC anomolies in the current 15 minute interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.25 |
| adGenVdsl2VtucPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the
beginning of the current 1-day interval. | column | seconds Unsigned32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.26 |
| adGenVdsl2VtucPerfCurr1DayLofs Count of the number of seconds when there was Loss
of Framing during the current day as measured by
adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.27 |
| adGenVdsl2VtucPerfCurr1DayLoss Count of the number of seconds when there was Loss
of Signal during the current day as measured by
adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.28 |
| adGenVdsl2VtucPerfCurr1DayLols Count of the number of seconds when there was Loss
of Link during the current day as measured by
adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.29 |
| adGenVdsl2VtucPerfLols Count of the number of Loss of Link failures since
agent reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.3 |
| adGenVdsl2VtucPerfCurr1DayLprs Count of the number of seconds when there was Loss
of Power during the current day as measured by
adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.30 |
| adGenVdsl2VtucPerfCurr1DayEs Count of Errored Seconds (ES) since the beginning
of the current 1-day interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.31 |
| adGenVdsl2VtucPerfCurr1DayInits Count of the line initialization attempts in the
day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed.
Includes both successful and failed attempts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.32 |
| adGenVdsl2VtucPerfCurr1DaySes Count of Severely Errored Seconds during the current day as
measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.33 |
| adGenVdsl2VtucPerfCurr1DayUas Count of Unavailable Seconds during the current day as
measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.34 |
| adGenVdsl2VtucPerfCurr1DayFecs Count of FEC Seconds during the current day as
measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.35 |
| adGenVdsl2VtucPerfCurr1DayCrc Count of CRC anomolies during the current day as
measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.36 |
| adGenVdsl2VtucPerfCurr1DayFec Count of FEC anomolies during the current day as
measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.37 |
| adGenVdsl2VtucPerfTcTxUnits Count of total transmitted transmission convergence layer
(TC) cells (ATM framing mode) or packets (other framing
modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.38 |
| adGenVdsl2VtucPerfTcTxDataUnits Count of data carrying transmitted transmission convergence
layer (TC) cells (ATM framing mode) or packets (other
framing modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.39 |
| adGenVdsl2VtucPerfLprs Count of the number of Loss of Power failures since
agent reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.4 |
| adGenVdsl2VtucPerfTcTxDataOctets Count of octets in data carrying transmitted transmission
convergence layer (TC) cells (ATM framing mode) or packets
(other framing modes). | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.40 |
| adGenVdsl2VtucPerfTcTxIdleUnits Count of idle/pause transmitted transmission convergence
layer (TC) cells (ATM framing mode) or packets (other
framing modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.41 |
| adGenVdsl2VtucPerfTcRxUnits Count of total transmitted transmission convergence layer
(TC) cells (ATM framing mode) or packets (other framing
modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.42 |
| adGenVdsl2VtucPerfTcRxDataUnits Count of data carrying received transmission convergence
layer (TC) cells (ATM framing mode) or packets (other
framing modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.43 |
| adGenVdsl2VtucPerfTcRxDataOctets Count of octets in data carrying received transmission
convergence layer (TC) cells (ATM framing mode) or packets
(other framing modes). | column | octets SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.44 |
| adGenVdsl2VtucPerfTcRxIdleUnits Count of idle/pause received transmission convergence
layer (TC) cells (ATM framing mode) or packets (other
framing modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.45 |
| adGenVdsl2VtucPerfTcRxErroredUnits Count of errored received transmission convergence
layer (TC) cells (ATM framing mode) or packets (other
framing modes). | column | pkts/cells SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.46 |
| adGenVdsl2VtucPerfSraDownshifts Free-rolling count of SRA payload rate downshifts
since last successful train. | column | downshifts SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.47 |
| adGenVdsl2VtucPerfSraUpshifts Free-rolling count of SRA payload rate upshifts
since last successful train. | column | upshifts SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.48 |
| adGenVdsl2VtucPerfCurr15MinSraDownshifts Count of SRA payload rate downshifts since last
successful train in the current 15-min interval | column | downshifts SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.49 |
| adGenVdsl2VtucPerfCurr15MinSraUpshifts Count of SRA payload rate upshifts since last
successful train in the current 15-min interval | column | upshifts SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.50 |
| adGenVdsl2VtucPerfCurr15MinSraRateMax Max payload rate in the current 15-min interval
since last successful train. Min and max rate
should only be different in the case of an SRA
event. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.51 |
| adGenVdsl2VtucPerfCurr15MinSraRateMin Min payload rate in the current 15-min interval
since last successful train. Min and max rate
should only be different in the case of an SRA
event. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.52 |
| adGenVdsl2VtucPerfCurr1DaySraDownshifts Count of SRA payload rate downshifts since last
successful train in the current 24-hr interval | column | downshifts SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.53 |
| adGenVdsl2VtucPerfCurr1DaySraUpshifts Count of SRA payload rate upshifts since last
successful train in the current 24-hr interval | column | upshifts SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.54 |
| adGenVdsl2VtucPerfCurr1DaySraRateMax Max payload rate in the current 24-hr interval
since last successful train. Min and max rate
should only be different in the case of an SRA
event. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.55 |
| adGenVdsl2VtucPerfCurr1DaySraRateMin Min payload rate in the current 24-hr interval
since last successful train. Min and max rate
should only be different in the case of an SRA
event. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.56 |
| adGenVdsl2VtucPerfRtxMinEftr Retransmission parameter defined as the minimum of
the error-free throughput rate observed since reset. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.57 |
| adGenVdsl2VtucPerfRtxLeftrs Count of low error-free throughput rate defect
seconds since reset. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.58 |
| adGenVdsl2VtucPerfCurr15MinRtxMinEftr Retransmission parameter defined as the minimum of
the error-free throughput rate observed in the
current 15-min interval. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.59 |
| adGenVdsl2VtucPerfInits Count of the line initialization attempts since
agent reset. Includes both successful and failed
attempts. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.6 |
| adGenVdsl2VtucPerfCurr15MinRtxLeftrs Count of low error-free throughput rate defect
seconds in the current 15-min interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.60 |
| adGenVdsl2VtucPerfCurr1DayRtxMinEftr Retransmission parameter showing the minimum of
the error-free throughput rate observed in the
current 24-hr interval. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.61 |
| adGenVdsl2VtucPerfCurr1DayRtxLeftrs Count of low error-free throughput rate defect
seconds in the current 24-hr interval. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.62 |
| adGenVdsl2VtucPerfSes Count of Severely Errored Seconds since the unit was last
reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.7 |
| adGenVdsl2VtucPerfUas Count of Unavailable Seconds since the unit was last
reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.8 |
| adGenVdsl2VtucPerfFecs Count of the number of FEC Seconds since agent
reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.65.1.3.1.1.9 |