adGenVdsl2VtucInvVersionNumber

ADTRAN-GENVDSL2-LINE-MIB · .1.3.6.1.4.1.664.5.65.1.2.2.1.3
MIB view Table view

Object

column SNMPv2-TCDisplayString 
The vendor specific version number sent by this ATU
as part of the initialization messages.  It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters.

Context

MIB
ADTRAN-GENVDSL2-LINE-MIB
OID
.1.3.6.1.4.1.664.5.65.1.2.2.1.3
Type
column
Access
readonly
Status
current
Parent
adGenVdsl2VtucPhysEntry
Table
adGenVdsl2VtucPhysTable
Siblings
20

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenVdsl2VtucInvSerialNumber
The vendor specific string that identifies the vendor equipment.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.65.1.2.2.1.1
adGenVdsl2VtucPrevTxRate
The payload rate of the previous successful train.
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.10
adGenVdsl2VtucActTxPsd
Actual Power Spectrum Density (PSD) transmitted. The average transmit PSD over the sub-carriers. It ranges from -900 to 0 units of 0.1 dB (Physical values are -90 to 0 dBm/Hz). A…
column0.1 dB Integer32.1.3.6.1.4.1.664.5.65.1.2.2.1.11
adGenVdsl2VtucCurrTpsTcStatus
Attributes with this syntax are status parameters that reflect the failure status for Transmission Convergence (TC) layer of a given data layer interface (data path over a VDSL2 /…
columnEnumeration.1.3.6.1.4.1.664.5.65.1.2.2.1.12
adGenVdsl2VtucCurrTxLineRate
The line rate, including all payload and overhead rates.
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.13
adGenVdsl2VtucPrevTxLineRate
The line rate, including all payload and overhead rates, of the previous successful train.
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.14
adGenVdsl2VtucCircuitProviderCode
Returns local circuit provider code
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.65.1.2.2.1.15
adGenVdsl2VtucCurrTxRateMax
Returns max payload rate since last successful train.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.16
adGenVdsl2VtucCurrTxRateMin
Returns min payload rate since last successful train.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.17
adGenVdsl2VtucLastSraDownshift
Returns system uptime of last SRA downshift since last successful train.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.664.5.65.1.2.2.1.18
adGenVdsl2VtucLastSraUpshift
Returns system uptime of last SRA upshift since last successful train.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.664.5.65.1.2.2.1.19
adGenVdsl2VtucInvVendorID
The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.65.1.2.2.1.2
adGenVdsl2VtucRtxUsed
Specifies whether retransmission is active in the transmit direction.
columnEnumeration.1.3.6.1.4.1.664.5.65.1.2.2.1.20
adGenVdsl2VtucRtxEtr
Expected throughput rate calculated from combined effect of impulse noise protection against worst-case REIN and worst-case SHINE and overhead from correction of stationary noise …
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.21
adGenVdsl2CurrUSSnrMgn
Noise Margin as seen by this ATU with respect to its received signal in tenth dB.
columntenth dB Integer32.1.3.6.1.4.1.664.5.65.1.2.2.1.4
adGenVdsl2CurrUSAtn
Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.
columntenth dB Integer32.1.3.6.1.4.1.664.5.65.1.2.2.1.5
adGenVdsl2VtucCurrStatus
Indicates current state of the Vtuc line. This is a bit-map of possible conditions. The various bit positions are: Bit 00 : There no defects on the …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.65.1.2.2.1.6
adGenVdsl2VtucCurrOutputPwr
Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.
columntenth dBm Integer32.1.3.6.1.4.1.664.5.65.1.2.2.1.7
adGenVdsl2VtucCurrAttainableRate
Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.8
adGenVdsl2VtucCurrTxRate
The payload rate of the last successful train.
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.664.5.65.1.2.2.1.9