adGenVdsl2CurrDSAtn
ADTRAN-GENVDSL2-LINE-MIB ·
.1.3.6.1.4.1.664.5.65.1.2.3.1.5
Object
column
tenth dB Integer32
Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.
Context
- MIB
- ADTRAN-GENVDSL2-LINE-MIB
- OID
.1.3.6.1.4.1.664.5.65.1.2.3.1.5- Type
- column
- Access
- readonly
- Status
- current
- Units
- tenth dB
- Parent
- adGenVdsl2VturPhysEntry
- Table
- adGenVdsl2VturPhysTable
- Siblings
- 20
Syntax
tenth dB Integer32
Values & Constraints
Object Constraints
range: 0-630
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenVdsl2VturInvSerialNumber The vendor specific string that identifies the
vendor equipment. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.3.1.1 |
| adGenVdsl2VturPrevTxRate The payload rate of the previous successful train. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.10 |
| adGenVdsl2VturActTxPsd Actual Power Spectrum Density (PSD) transmitted. The average
transmit PSD over the sub-carriers.
It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz).
A… | column | 0.1 dB Integer32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.11 |
| adGenVdsl2VturCurrTxLineRate The line rate, including all payload and
overhead rates. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.12 |
| adGenVdsl2VturPrevTxLineRate The line rate, including all payload and
overhead rates, of the previous successful train. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.13 |
| adGenVdsl2VturCircuitProviderCode Returns remote circuit provider code | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.3.1.14 |
| adGenVdsl2VturCircuitCapabilities Returns remote circuit capabilities in bit masks with following order:
0 - Disabled, 1 - Enabled
Byte Order of octet string:
Byte 0. Byte 1. Byte 2. Byte 3. Byte 4. Byte 5. Byte 6… | column | OctetString | .1.3.6.1.4.1.664.5.65.1.2.3.1.15 |
| adGenVdsl2VturCurrTxRateMax Returns max payload rate since last successful
train. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.16 |
| adGenVdsl2VturCurrTxRateMin Returns min payload rate since last successful
train. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.17 |
| adGenVdsl2VturLastSraDownshift Returns system uptime of last SRA downshift
since last successful train. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.664.5.65.1.2.3.1.18 |
| adGenVdsl2VturLastSraUpshift Returns system uptime of last SRA upshift
since last successful train. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.664.5.65.1.2.3.1.19 |
| adGenVdsl2VturInvVendorID The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.3.1.2 |
| adGenVdsl2VturRtxUsed Specifies whether retransmission is active in the
transmit direction. | column | Enumeration | .1.3.6.1.4.1.664.5.65.1.2.3.1.20 |
| adGenVdsl2VturRtxEtr Expected throughput rate calculated from combined effect of
impulse noise protection against worst-case REIN and worst-case
SHINE and overhead from correction of stationary noise … | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.21 |
| adGenVdsl2VturInvVersionNumber The vendor specific version number sent by this ATU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed a… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.65.1.2.3.1.3 |
| adGenVdsl2CurrDSSnrMgn Noise Margin as seen by this ATU with respect to its
received signal in tenth dB. | column | tenth dB Integer32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.4 |
| adGenVdsl2VturCurrStatus Indicates current state of the Vtur line. This is a
bit-map of possible conditions. Due to the isolation
of the Vtur when line problems occur, many state
conditions like loss of… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.6 |
| adGenVdsl2VturCurrOutputPwr Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence. | column | tenth dBm Integer32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.7 |
| adGenVdsl2VturCurrAttainableRate Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.8 |
| adGenVdsl2VturCurrTxRate The payload rate of the last successful train. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.664.5.65.1.2.3.1.9 |