adGenTA8xxIpv6AddressLinkLocalOperational

ADTRAN-GENTA8XX-MIB · .1.3.6.1.4.1.664.5.69.2.3.1.30
MIB view Table view

Object

scalar INET-ADDRESS-MIBInetAddressIPv6 
The operational 128-bit IPv6 link-local address.

Context

MIB
ADTRAN-GENTA8XX-MIB
OID
.1.3.6.1.4.1.664.5.69.2.3.1.30
Type
scalar
Access
readonly
Status
current
Parent
adGenTA8xxStatScalars
Siblings
29

Syntax

INET-ADDRESS-MIBInetAddressIPv6
Source
INET-ADDRESS-MIBInetAddressIPv6
Base type
OctetString

Values & Constraints

Type Constraints
range: 16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenTA8xxCardStatus
This variable indicates the equipment status of the card.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.1
adGenTA8xxIPAddress
The IP Address assigned to this interface, if any.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.5.69.2.3.1.10
adGenTA8xxSubnetMask
The Subnet Mask assigned to this interface, if any.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.5.69.2.3.1.11
adGenTA8xxDefaultGateway
The Default Gateway assigned to this interface, if any.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.5.69.2.3.1.12
adGenTA8xxBondingFunctLineSource
Indicates which timing source is active. If both timing sources are impaired, fail is reported.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.13
adGenTA8xxBondingPriRefStatus
Provides the status of the primary Bonding reference source.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.14
adGenTA8xxBondingSecRefStatus
Provides the status of the secondary Bonding reference source.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.15
adGenTA8xxIpACLDepth
The current number of entries in the IP Access Control List. The maximum value is 64.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.69.2.3.1.16
adGenTA8xxCurrentCPUUtilization
The current CPU utilization.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.69.2.3.1.17
adGenTA8xxMaxCPUUtilization
The maximum CPU utilization since the last time the value was reset.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.69.2.3.1.18
adGenTA8xxResetMaxCPUUtilization
Resets the maximum CPU utilization.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.19
adGenTA8xxCritRelay
Indicates the current state of the Critical Alarm Relay.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.2
adGenTA8xxTemperatureCelsuis
This value is the Celsuis temperature.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.69.2.3.1.20
adGenTA8xxTemperatureFahrenheit
This value is the Fahrenheit temperature.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.69.2.3.1.21
adGenTA8xxCustomerDoor
This variable is status of the Customer Door.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.22
adGenTA8xxTelcoDoor
This variable is status of the Telco Door.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.23
adGenTA8xxAux1Door
This variable is status of the Aux1 Door.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.24
adGenTA8xxIpv6AddressPrefixLength
The provisioned IPv6 unicast address prefix length.
scalarINET-ADDRESS-MIBInetAddressPrefixLength.1.3.6.1.4.1.664.5.69.2.3.1.25
adGenTA8xxIpv6AddressEui64
When true, then the operational IPv6 unicast address is a combination of the provisioned prefix and an EUI-64 formatted Interface ID.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.69.2.3.1.26
adGenTA8xxIpv6Address
The provisioned IPv6 unicast address or address prefix. If EUI-64 is false, then the operational unicast address equals this value. If EUI-64 is true, then the operational unicast…
scalarINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.664.5.69.2.3.1.27
adGenTA8xxIpv6AddressOperational
The operational 128-bit IPv6 unicast address.
scalarINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.664.5.69.2.3.1.28
adGenTA8xxIpv6AddressLinkLocal
The provisioned IPv6 link-local address prefix. The prefix length is implicitly 10 bits.
scalarINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.664.5.69.2.3.1.29
adGenTA8xxMajRelay
Indicates the current state of the Major Alarm Relay.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.3
adGenTA8xxMinRelay
Indicates the current state of the Minor Alarm Relay.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.4
adGenTA8xxacoStatus
Indicates the current state of the front panel ACO button.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.5
adGenTA8xxACPwrInStatus
Indicates whether or not the AC_PWR_IN alarm input is active.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.6
adGenTA8xxPowerAStatus
Indicates the state of the power supply A alarm input.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.7
adGenTA8xxPowerBStatus
Indicates the state of the power supply B alarm input.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.8
adGenTA8xxEnvAlarmsAggregateStatus
Indicates the highest active severity of all the environmental alarms.
scalarEnumeration.1.3.6.1.4.1.664.5.69.2.3.1.9