adGenFxoInterfaceRingTripMode

ADTRAN-GENFXO-MIB · .1.3.6.1.4.1.664.5.70.38.1.2.1.1.13
MIB view Table view

Object

column r/w Enumeration 
Use to set the ring-trip mode of the interface.
1 = normal        Use a normal off-hook to trip ringing voltage.
2 = forced        Force a ring-ground on loop to sink ringing current.
3 = delayed       Wait until ring pause interval before going off-hook.

Context

MIB
ADTRAN-GENFXO-MIB
OID
.1.3.6.1.4.1.664.5.70.38.1.2.1.1.13
Type
column
Access
readwrite
Status
current
Parent
adGenFxoInterfaceProvEntry
Table
adGenFxoInterfaceProvTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
1normal
2forced
3delayed

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenFxoInterfaceLastErrorString
The reason for the last error that occured while accessing an entry in the FXO Interface Prov Table.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.70.38.1.2.1.1.1
adGenFxoInterfaceCWCIdAckGenDelay
Use to set the Call-Waiting Caller-ID ACK generation delay.
columnUnsigned32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.10
adGenFxoInterfaceCWCIdAckGenEnable
Use to enable/disable Caller-ID ACK generation during Call-Waiting interval.
columnEnumeration.1.3.6.1.4.1.664.5.70.38.1.2.1.1.11
adGenFxoInterfaceTargetFxsLocation
Use to connect FXO interface to an FXS interface.
columnAdGenFxoInterfaceFxsLocation.1.3.6.1.4.1.664.5.70.38.1.2.1.1.12
adGenFxoInterfaceRingTripDuration
Use to set duration of the ring-ground interval in 'forced' ring-trip mode.
columnmilliseconds Unsigned32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.14
adGenFxoInterfaceRingTripMuteInterval
Use to set a delay before enabling the voice path when going off-hook, exiting the 'forced' or 'delayed' ring-trip modes. Valid values are <0,20-400> ('0' to disable).
columnmilliseconds Unsigned32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.15
adGenFxoCircuitIdentifier
The circuit identifier string for the fxo port.
columnOctetString.1.3.6.1.4.1.664.5.70.38.1.2.1.1.16
adGenFxoInterfaceSignalingMode
Use to set signaling mode of the 2-Wire interface. 1 = loopStart Loop-Start signaling. 2 = groundStart Ground-Start signaling. 3 = tr08sp TR-08 Single Party signaling…
columnEnumeration.1.3.6.1.4.1.664.5.70.38.1.2.1.1.2
adGenFxoInterfaceTxGain
Set gain from the line (A/D).
column0.1dB SNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.3
adGenFxoInterfaceMinTxGain
Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Tx Gain value for use in range checking.
column0.1dB SNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.4
adGenFxoInterfaceMaxTxGain
Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Tx Gain value for use in range checking.
column0.1dB SNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.5
adGenFxoInterfaceRxGain
Set gain toward the line (D/A).
column0.1dB SNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.6
adGenFxoInterfaceMinRxGain
Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Rx Gain value for use in range checking.
column0.1dB SNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.7
adGenFxoInterfaceMaxRxGain
Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Rx Gain value for use in range checking.
column0.1dB SNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.70.38.1.2.1.1.8
adGenFxoInterfaceImpedance
Use to set the terminating impedance of the interface. 1 = z600r 600 Ohms. 2 = z900z 900 Ohms + 2.16 uF. 3 = z1 220 + ( 820 // 115nF). 4 = z2 …
columnEnumeration.1.3.6.1.4.1.664.5.70.38.1.2.1.1.9