adGenFxoInterfaceImpedance – ADTRAN-GENFXO-MIB

Object

column r/w Enumeration

Use to set the terminating impedance of the interface.
1 = z600r         600 Ohms.
2 = z900z         900 Ohms + 2.16 uF.
3 = z1            220 + ( 820 // 115nF).
4 = z2            270 + ( 750 // 150nF).
5 = z3            270 + ( 750 // 150nF), Zin = 600r.
6 = z4            320 + (1050 // 230nF).
7 = z5            350 + (1000 // 210nF), Zin = 600r.
8 = z6            370 + ( 620 // 310nF).
9 = z7            800 // (100 + 50nF), Zin = 900c.
10 = z8           1650 // (100 + 5nF), Zin = 900c.
11 = z9           900c, Zin = 800 // (100 + 50nF).
12 = z10          900c, Zin = 1650 // (100 + 5nF).

Context

MIB: ADTRAN-GENFXO-MIB
OID: .1.3.6.1.4.1.664.5.70.38.1.2.1.1.9
Type: column
Access: readwrite
Status: current
Parent: adGenFxoInterfaceProvEntry
Table: adGenFxoInterfaceProvTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	z600r
`2`	z900z
`3`	z1
`4`	z2
`5`	z3
`6`	z4
`7`	z5
`8`	z6
`9`	z7
`10`	z8
`11`	z9
`12`	z10

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adGenFxoInterfaceLastErrorString The reason for the last error that occured while accessing an entry in the FXO Interface Prov Table.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.1`
adGenFxoInterfaceCWCIdAckGenDelay Use to set the Call-Waiting Caller-ID ACK generation delay.	column	Unsigned32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.10`
adGenFxoInterfaceCWCIdAckGenEnable Use to enable/disable Caller-ID ACK generation during Call-Waiting interval.	column	Enumeration	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.11`
adGenFxoInterfaceTargetFxsLocation Use to connect FXO interface to an FXS interface.	column	AdGenFxoInterfaceFxsLocation	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.12`
adGenFxoInterfaceRingTripMode Use to set the ring-trip mode of the interface. 1 = normal Use a normal off-hook to trip ringing voltage. 2 = forced Force a ring-ground on loop to sink ringing curr…	column	Enumeration	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.13`
adGenFxoInterfaceRingTripDuration Use to set duration of the ring-ground interval in 'forced' ring-trip mode.	column	milliseconds Unsigned32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.14`
adGenFxoInterfaceRingTripMuteInterval Use to set a delay before enabling the voice path when going off-hook, exiting the 'forced' or 'delayed' ring-trip modes. Valid values are <0,20-400> ('0' to disable).	column	milliseconds Unsigned32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.15`
adGenFxoCircuitIdentifier The circuit identifier string for the fxo port.	column	OctetString	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.16`
adGenFxoInterfaceSignalingMode Use to set signaling mode of the 2-Wire interface. 1 = loopStart Loop-Start signaling. 2 = groundStart Ground-Start signaling. 3 = tr08sp TR-08 Single Party signaling…	column	Enumeration	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.2`
adGenFxoInterfaceTxGain Set gain from the line (A/D).	column	0.1dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.3`
adGenFxoInterfaceMinTxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Tx Gain value for use in range checking.	column	0.1dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.4`
adGenFxoInterfaceMaxTxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Tx Gain value for use in range checking.	column	0.1dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.5`
adGenFxoInterfaceRxGain Set gain toward the line (D/A).	column	0.1dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.6`
adGenFxoInterfaceMinRxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve minimum valid Rx Gain value for use in range checking.	column	0.1dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.7`
adGenFxoInterfaceMaxRxGain Range of adGenFxoInterfaceTxGain varies by product. Retrieve maximum valid Rx Gain value for use in range checking.	column	0.1dB SNMPv2-SMIInteger32	`.1.3.6.1.4.1.664.5.70.38.1.2.1.1.8`