adGenCSMPortDefaultCDVT
ADTRAN-GENCSM2-MIB ·
.1.3.6.1.4.1.664.5.36.6.18.1.23
Object
Port-wide default input CDVT setting. If this value is non-zero
and the traffic descriptor for does not explicitly state a
CDVT value, this value is used as the 'implied' CDVT. If this
value is zero, a calculated valued based on the PCR of the
Traffic descriptor is used instead. Currently, this calculated
value is 100 * PCR of the circuit being admitted.
Changing the default input CDVT value will not affect any VC or
VP cross connects that are currently in the 'active' state.
These VC/VP cross Connects will continue to use the CDVT value
that was in effect when the VC/VP cross connect was made active.
The new input CDVT value will be used on these VC/VP cross
connects the next time they are placed in a notInService state
or the CSM is rebooted.
If the override flag is set to false, then this value is read-only
and is inherited from the setting of the adGenCSMDirectionDefaultCDVT
variable.
Context
- MIB
- ADTRAN-GENCSM2-MIB
- OID
.1.3.6.1.4.1.664.5.36.6.18.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 100 nanoseconds
- Parent
- adGenCSMPortOptionEntry
- Table
- adGenCSMPortOptionTable
- Siblings
- 41
Syntax
100 nanoseconds SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenCSMPortPolicingDisable Flag indicating if ingress policing should be disabled for
this port if the associated Port override flag is
set to true. If the override flag is set to false, then this
value is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.1 |
| adGenCSMPortUbrMaxMaxThrsh Port specific maximum max Cell Buffer Theshold the UBR
traffic class if the associated port override flag is set
to true. If the override flag is set to false, then this
value is… | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.10 |
| adGenCSMPortUbrMaxFrameMultiplier Port specific multiplier to use for the UBR traffic class to
use when determining the CLP-0 threshold if the associated
port override flag is set to true. If the override flag is… | column | Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.11 |
| adGenCSMPortPolicingDisableOverride Flag indicating if Port Policing Disable value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.12 |
| adGenCSMPortCellRateCACDisableOverride Flag indicating if Cell Rate CAC Disable value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.13 |
| adGenCSMPortBufferCACDisableOverride Flag indicating if Buffer CAC Disable value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.14 |
| adGenCSMPortCbrOverbookingOverride Flag indicating if CBR Overbooking value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.15 |
| adGenCSMPortRtVbrOverbookingOverride Flag indicating if rtVBR Overbooking value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.16 |
| adGenCSMPortNrtVbrOverbookingOverride Flag indicating if nrtVBR Overbooking value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.17 |
| adGenCSMPortMaximumThresholdOverride Flag indicating if maximum buffer threshold value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.18 |
| adGenCSMPortUbrMaxClp1ThrshOverride Flag indicating if UBR Maximum CLP-0 buffer threshold value
should override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.19 |
| adGenCSMPortCellRateCACDisable Flag indicating if CAC failures due to Cell Rate calculations
should be disabled if the associated port override flag is
set to true. If the override flag is set to false, then t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.2 |
| adGenCSMPortUbrMaxClp0ThrshOverride Flag indicating if UBR Maximum CLP-1 buffer threshold value
should override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.20 |
| adGenCSMPortUbrMaxMaxThrshOverride Flag indicating if UBR Maximum max buffer threshold value
should override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.21 |
| adGenCSMPortUbrMaxFrameMultiplierOverride Flag indicating if UBR frame multiplyer value should override
the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.22 |
| adGenCSMPortAisRdiDisable Port-wide flag indicating if AIS/RDI events should be
generated on VC/VPs by the CSM when an out-of-cell delineation
event occurs. If AIS/RDI is disabled, AIS/RDI cells received
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.24 |
| adGenCSMPortInputCdv Port-wide input Cell Delay Variation value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override flag is set to… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.18.1.25 |
| adGenCSMPortOutputCdv Port-wide output Cell Delay Variation value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override flag is set t… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.18.1.26 |
| adGenCSMPortInputMaxCtd Port-wide input Maximum Cell Transfer Delay value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override flag is… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.18.1.27 |
| adGenCSMPortOutputMaxCtd Port-wide output Maximum Cell Transfer Delay value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override flag i… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.18.1.28 |
| adGenCSMPortCbrClassScheduling Port-wide scheduling algorythm to use for the CBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from the set… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.18.1.29 |
| adGenCSMPortBufferCACDisable Flag indicating if CAC failures due to buffer threshold
calculations should be disabled if the associated port
override flag is set to true. If the override flag is set to
false,… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.3 |
| adGenCSMPortRtVbrClassScheduling Port-wide scheduling algorythm to use for the rtVBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from the s… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.18.1.30 |
| adGenCSMPortNrtVbrClassScheduling Port-wide scheduling algorythm to use for the nrtVBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from the … | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.18.1.31 |
| adGenCSMPortUbrClassScheduling Port-wide scheduling algorythm to use for the UBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from the set… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.18.1.32 |
| adGenCSMPortDefaultCDVTOverride Flag indicating if the default CDVT value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.33 |
| adGenCSMPortAisRdiDisableOverride Flag indicating if the AIS/RDI Disable value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.34 |
| adGenCSMPortInputCdvOverride Flag indicating if the Input CDV value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.35 |
| adGenCSMPortOutputCdvOverride Flag indicating if the Output CDV value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.36 |
| adGenCSMPortInputMaxCtdOverride Flag indicating if the Input Max CTD value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.37 |
| adGenCSMPortOutputMaxCtdOverride Flag indicating if the Output Max CTD value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.38 |
| adGenCSMPortCbrClassSchedulingOverride Flag indicating if the CBR Class Scheduling value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.39 |
| adGenCSMPortCbrOverbooking Port specific overbooking/oversubscription percentage for
the CBR traffic class if the associated ort override flag
is set to true. If the override flag is set to false, then thi… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.4 |
| adGenCSMPortRtVbrClassSchedulingOverride Flag indicating if the rtVBR Class Scheduling value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.40 |
| adGenCSMPortNrtVbrClassSchedulingOverride Flag indicating if the nrtVBR Class Scheduling value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.41 |
| adGenCSMPortUbrClassSchedulingOverride Flag indicating if the UBR Class Scheduling value should
override the setting of the associated Direction value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.18.1.42 |
| adGenCSMPortRtVbrOverbooking Port specific overbooking/oversubscription percentage for
the rtVBR traffic class if the associated ort override flag
is set to true. If the override flag is set to false, then t… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.5 |
| adGenCSMPortNrtVbrOverbooking Port specific overbooking/oversubscription percentage for
the nrtVBR traffic class if the associated port override flag
is set to true. If the override flag is set to false, then… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.6 |
| adGenCSMPortMaximumThreshold Port specific setting that controls the maximum value that
the Port Cell Buffer Maximum Threshold register can contain.
class. A user may wish to modify this value for both for a… | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.7 |
| adGenCSMPortUbrMaxClp1Thrsh Port specific maximum CLP-1 Cell Buffer Theshold the UBR
traffic class if the associated port override flag is set
to true. If the override flag is set to false, then this
value … | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.8 |
| adGenCSMPortUbrMaxClp0Thrsh Port specific maximum CLP-0 Cell Buffer Theshold the UBR
traffic class if the associated port override flag is set
to true. If the override flag is set to false, then this
value … | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.18.1.9 |