adGenCSMMonitorSessionParam2
ADTRAN-GENCSM2-MIB ·
.1.3.6.1.4.1.664.5.36.7.2.1.13
Object
This object specifies the VPI parameter if the session scope adGenCSMMonitorSessionScope is set to vp(3) or vc(4).
Context
- MIB
- ADTRAN-GENCSM2-MIB
- OID
.1.3.6.1.4.1.664.5.36.7.2.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenCSMMonitorSessionEntry
- Table
- adGenCSMMonitorSessionTable
- Siblings
- 13
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenCSMMonitorSessionId Session index that uniquely identifies a monitoring session.
Typically a session index is obtained by reading the
adGenCSMMonitorSessionIndexNext object. | column | Unsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.1 |
| adGenCSMMonitorSessionElapsedIntervals This object records the number of intervals that have
elapsed for an active(1) monitor session. This object can
be monitored by a manager to determine if new data is
available in… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.36.7.2.1.10 |
| adGenCSMMonitorSessionClasses This object specifies the ATM traffic classes of interest
for a monitor session. If a particular bit is set, then
counter data for the indicated traffic class will be included
in… | column | Integer32 | .1.3.6.1.4.1.664.5.36.7.2.1.11 |
| adGenCSMMonitorSessionParam1 This object specifies the ifIndex parameter if the session
scope adGenCSMMonitorSessionScope is set to port(2), vp(3),
or vc(4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.12 |
| adGenCSMMonitorSessionParam3 This object specifies the VCI parameter if the session
scope adGenCSMMonitorSessionScope is set to vc(4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.14 |
| adGenCSMMonitorSessionName A short name for the monitor session. | column | OctetString | .1.3.6.1.4.1.664.5.36.7.2.1.2 |
| adGenCSMMonitorSessionDescription A description for the monitor session. This field can be
used by the manager to store additional information of
importance to a particular monitor session. | column | OctetString | .1.3.6.1.4.1.664.5.36.7.2.1.3 |
| adGenCSMMonitorSessionRowStatus Used to start/stop/destroy the session. Please refer to
the procedures listed in the adGenCSMMonitorSessionEntry
object for the proper use of object. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.36.7.2.1.4 |
| adGenCSMMonitorSessionStartTimeStamp Provides the system time with which the monitoring session
was made active. A manager can monitor this object for
change in an active session to identify if a CSM restart
has occ… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.664.5.36.7.2.1.5 |
| adGenCSMMonitorSessionScope This object provides the level of scope of the monitoring
session. Depending upon the scope, different minimum and
maximum values for the adGenCSMMonitorSessionIntervalDuration
m… | column | AdGenCSMMonitorScope | .1.3.6.1.4.1.664.5.36.7.2.1.6 |
| adGenCSMMonitorSessionMaxIntervals This object defines the maximum number of samples intervals
that are to be collected. When the maximum value is reached,
an active(1) monitor session will automatically halt and
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.7 |
| adGenCSMMonitorSessionIntervalDuration This object specifies the duration, in seconds, of each
sample interval. The minimum value of 10 seconds applies
for the port(2), vp(3), and vc(4) levels of scope. The
shelf(1) … | column | Integer32 | .1.3.6.1.4.1.664.5.36.7.2.1.8 |
| adGenCSMMonitorSessionCacheInterval This object specifies the number of samples to maintain
in a local cache for later retrieval by a manager. Each
monitor session displays accumulated, average, maximum,
minimum, a… | column | Integer32 | .1.3.6.1.4.1.664.5.36.7.2.1.9 |