adGenCSMMonitorSessionMaxIntervals

ADTRAN-GENCSM2-MIB · .1.3.6.1.4.1.664.5.36.7.2.1.7
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
This object defines the maximum number of samples intervals
that are to be collected.  When the maximum value is reached,
an active(1) monitor session will automatically halt and
enter the notInService(2) state.  A value of zero (0) can
be used to specify that the monitoring session should run
until specifically requested to stop by a manager setting
the adGenCSMMonitorSessionRowStatus object.

Context

MIB
ADTRAN-GENCSM2-MIB
OID
.1.3.6.1.4.1.664.5.36.7.2.1.7
Type
column
Access
readwrite
Status
current
Parent
adGenCSMMonitorSessionEntry
Table
adGenCSMMonitorSessionTable
Siblings
13

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenCSMMonitorSessionId
Session index that uniquely identifies a monitoring session. Typically a session index is obtained by reading the adGenCSMMonitorSessionIndexNext object.
columnUnsigned32.1.3.6.1.4.1.664.5.36.7.2.1.1
adGenCSMMonitorSessionElapsedIntervals
This object records the number of intervals that have elapsed for an active(1) monitor session. This object can be monitored by a manager to determine if new data is available in…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.664.5.36.7.2.1.10
adGenCSMMonitorSessionClasses
This object specifies the ATM traffic classes of interest for a monitor session. If a particular bit is set, then counter data for the indicated traffic class will be included in…
columnInteger32.1.3.6.1.4.1.664.5.36.7.2.1.11
adGenCSMMonitorSessionParam1
This object specifies the ifIndex parameter if the session scope adGenCSMMonitorSessionScope is set to port(2), vp(3), or vc(4).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.36.7.2.1.12
adGenCSMMonitorSessionParam2
This object specifies the VPI parameter if the session scope adGenCSMMonitorSessionScope is set to vp(3) or vc(4).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.36.7.2.1.13
adGenCSMMonitorSessionParam3
This object specifies the VCI parameter if the session scope adGenCSMMonitorSessionScope is set to vc(4).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.36.7.2.1.14
adGenCSMMonitorSessionName
A short name for the monitor session.
columnOctetString.1.3.6.1.4.1.664.5.36.7.2.1.2
adGenCSMMonitorSessionDescription
A description for the monitor session. This field can be used by the manager to store additional information of importance to a particular monitor session.
columnOctetString.1.3.6.1.4.1.664.5.36.7.2.1.3
adGenCSMMonitorSessionRowStatus
Used to start/stop/destroy the session. Please refer to the procedures listed in the adGenCSMMonitorSessionEntry object for the proper use of object.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.664.5.36.7.2.1.4
adGenCSMMonitorSessionStartTimeStamp
Provides the system time with which the monitoring session was made active. A manager can monitor this object for change in an active session to identify if a CSM restart has occ…
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.664.5.36.7.2.1.5
adGenCSMMonitorSessionScope
This object provides the level of scope of the monitoring session. Depending upon the scope, different minimum and maximum values for the adGenCSMMonitorSessionIntervalDuration m…
columnAdGenCSMMonitorScope.1.3.6.1.4.1.664.5.36.7.2.1.6
adGenCSMMonitorSessionIntervalDuration
This object specifies the duration, in seconds, of each sample interval. The minimum value of 10 seconds applies for the port(2), vp(3), and vc(4) levels of scope. The shelf(1) …
columnInteger32.1.3.6.1.4.1.664.5.36.7.2.1.8
adGenCSMMonitorSessionCacheInterval
This object specifies the number of samples to maintain in a local cache for later retrieval by a manager. Each monitor session displays accumulated, average, maximum, minimum, a…
columnInteger32.1.3.6.1.4.1.664.5.36.7.2.1.9