adGenCSMMonitorSessionClasses
ADTRAN-GENCSM2-MIB ·
.1.3.6.1.4.1.664.5.36.7.2.1.11
Object
column
r/w
Integer32
This object specifies the ATM traffic classes of interest
for a monitor session. If a particular bit is set, then
counter data for the indicated traffic class will be included
in the collection data. This object is only significant for
the shelf(1) and port(2) scopes. The bitmask for each ATM
traffic class is as follows:
CBR - 0x01
rtVBR - 0x02
nrtVBR - 0x04
UBR - 0x08
Context
- MIB
- ADTRAN-GENCSM2-MIB
- OID
.1.3.6.1.4.1.664.5.36.7.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenCSMMonitorSessionEntry
- Table
- adGenCSMMonitorSessionTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenCSMMonitorSessionId Session index that uniquely identifies a monitoring session.
Typically a session index is obtained by reading the
adGenCSMMonitorSessionIndexNext object. | column | Unsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.1 |
| adGenCSMMonitorSessionElapsedIntervals This object records the number of intervals that have
elapsed for an active(1) monitor session. This object can
be monitored by a manager to determine if new data is
available in… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.664.5.36.7.2.1.10 |
| adGenCSMMonitorSessionParam1 This object specifies the ifIndex parameter if the session
scope adGenCSMMonitorSessionScope is set to port(2), vp(3),
or vc(4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.12 |
| adGenCSMMonitorSessionParam2 This object specifies the VPI parameter if the session
scope adGenCSMMonitorSessionScope is set to vp(3) or vc(4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.13 |
| adGenCSMMonitorSessionParam3 This object specifies the VCI parameter if the session
scope adGenCSMMonitorSessionScope is set to vc(4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.14 |
| adGenCSMMonitorSessionName A short name for the monitor session. | column | OctetString | .1.3.6.1.4.1.664.5.36.7.2.1.2 |
| adGenCSMMonitorSessionDescription A description for the monitor session. This field can be
used by the manager to store additional information of
importance to a particular monitor session. | column | OctetString | .1.3.6.1.4.1.664.5.36.7.2.1.3 |
| adGenCSMMonitorSessionRowStatus Used to start/stop/destroy the session. Please refer to
the procedures listed in the adGenCSMMonitorSessionEntry
object for the proper use of object. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.664.5.36.7.2.1.4 |
| adGenCSMMonitorSessionStartTimeStamp Provides the system time with which the monitoring session
was made active. A manager can monitor this object for
change in an active session to identify if a CSM restart
has occ… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.664.5.36.7.2.1.5 |
| adGenCSMMonitorSessionScope This object provides the level of scope of the monitoring
session. Depending upon the scope, different minimum and
maximum values for the adGenCSMMonitorSessionIntervalDuration
m… | column | AdGenCSMMonitorScope | .1.3.6.1.4.1.664.5.36.7.2.1.6 |
| adGenCSMMonitorSessionMaxIntervals This object defines the maximum number of samples intervals
that are to be collected. When the maximum value is reached,
an active(1) monitor session will automatically halt and
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.7.2.1.7 |
| adGenCSMMonitorSessionIntervalDuration This object specifies the duration, in seconds, of each
sample interval. The minimum value of 10 seconds applies
for the port(2), vp(3), and vc(4) levels of scope. The
shelf(1) … | column | Integer32 | .1.3.6.1.4.1.664.5.36.7.2.1.8 |
| adGenCSMMonitorSessionCacheInterval This object specifies the number of samples to maintain
in a local cache for later retrieval by a manager. Each
monitor session displays accumulated, average, maximum,
minimum, a… | column | Integer32 | .1.3.6.1.4.1.664.5.36.7.2.1.9 |