adGenCSMDirectionMaximumThreshold
ADTRAN-GENCSM2-MIB ·
.1.3.6.1.4.1.664.5.36.6.17.1.8
Object
column
r/w
cells Integer32
Direction specific setting that controls the maximum value that the direction Cell Buffer Maximum Threshold register can contain. class. A user may wish to modify this value for both directions available on a shelf (WAN and Loop) if they know in advance where the majority of cell buffering may be required. One possible use for setting the WAN Direction maximum threshold would be to set it to a small value if the DS3 interface is not expected to be used. In this case, the user could increase the Loop Directions setting to the maximum value.
Context
- MIB
- ADTRAN-GENCSM2-MIB
- OID
.1.3.6.1.4.1.664.5.36.6.17.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- cells
- Parent
- adGenCSMDirectionOptionEntry
- Table
- adGenCSMDirectionOptionTable
- Siblings
- 45
Syntax
cells Integer32
Values & Constraints
Object Constraints
range: 1-262143
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenCSMDirection Used as the index to specify either the WAN or loop direction. | column | AdGenCSMDirection | .1.3.6.1.4.1.664.5.36.6.17.1.1 |
| adGenCSMDirectionUbrSharing Direction specific buffer sharing percentage for the UBR
traffic class if the associated direction override flag is set
to true. If the override flag is set to false, then this
v… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.10 |
| adGenCSMDirectionUbrMaxClp1Thrsh Direction specific maximum CLP-1 Cell Buffer Theshold the UBR
traffic class if the associated direction override flag is set
to true. If the override flag is set to false, then t… | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.11 |
| adGenCSMDirectionUbrMaxClp0Thrsh Direction specific maximum CLP-0 Cell Buffer Theshold the UBR
traffic class if the associated direction override flag is set
to true. If the override flag is set to false, then t… | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.12 |
| adGenCSMDirectionUbrMaxMaxThrsh Direction specific maximum max Cell Buffer Theshold the UBR
traffic class if the associated direction override flag is set
to true. If the override flag is set to false, then thi… | column | cells Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.13 |
| adGenCSMDirectionUbrMaxFrameMultiplier Direction specific multiplier to use for the UBR traffic class to
use when determining the CLP-0 threshold if the associated
direction override flag is set to true. If the overri… | column | Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.14 |
| adGenCSMDirectionPolicingDisableOverride Flag indicating if Direction Policing Disable value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.15 |
| adGenCSMDirectionCellRateCACDisableOverride Flag indicating if Cell Rate CAC Disable value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.16 |
| adGenCSMDirectionBufferCACDisableOverride Flag indicating if Buffer CAC Disable value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.17 |
| adGenCSMDirectionCbrOverbookingOverride Flag indicating if CBR Overbooking value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.18 |
| adGenCSMDirectionRtVbrOverbookingOverride Flag indicating if rtVBR Overbooking value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.19 |
| adGenCSMDirectionPolicingDisable Flag indicating if ingress policing should be disabled for
this direction if the associated direction override flag is
set to true. If the override flag is set to false, then thi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.2 |
| adGenCSMDirectionNrtVbrOverbookingOverride Flag indicating if nrtVBR Overbooking value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.20 |
| adGenCSMDirectionNrtVbrSharingOverride Flag indicating if nrtVBR spare buffer sharing value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.21 |
| adGenCSMDirectionUbrSharingOverride Flag indicating if UBR spare buffer sharing value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.22 |
| adGenCSMDirectionUbrMaxClp1ThrshOverride Flag indicating if UBR Maximum CLP-0 buffer threshold value
should override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.23 |
| adGenCSMDirectionUbrMaxClp0ThrshOverride Flag indicating if UBR Maximum CLP-1 buffer threshold value
should override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.24 |
| adGenCSMDirectionUbrMaxMaxThrshOverride Flag indicating if UBR Maximum max buffer threshold value
should override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.25 |
| adGenCSMDirectionUbrMaxFrameMultiplierOverride Flag indicating if UBR frame multiplyer value should override
the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.26 |
| adGenCSMDirectionDefaultCDVT Direction-wide default input CDVT setting. If this value is non-zero
and the traffic descriptor for does not explicitly state a
CDVT value, this value is used as the 'implied' CD… | column | 100 nanoseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.17.1.27 |
| adGenCSMDirectionAisRdiDisable Direction-wide flag indicating if AIS/RDI events should be
generated on VC/VPs by the CSM when an out-of-cell delineation
event occurs. If AIS/RDI is disabled, AIS/RDI cells rece… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.28 |
| adGenCSMDirectionInputCdv Direction-wide input Cell Delay Variation value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override flag is s… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.17.1.29 |
| adGenCSMDirectionCellRateCACDisable Flag indicating if CAC failures due to Cell Rate calculations
should be disabled if the associated direction override flag is
set to true. If the override flag is set to false, t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.3 |
| adGenCSMDirectionOutputCdv Direction-wide output Cell Delay Variation value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override flag is … | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.17.1.30 |
| adGenCSMDirectionInputMaxCtd Direction-wide input Maximum Cell Transfer Delay value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override fl… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.17.1.31 |
| adGenCSMDirectionOutputMaxCtd Direction-wide output Maximum Cell Transfer Delay value for ports.
Typically this value is only useful if Signaling/PNNI is
enabled on the system.
If the override f… | column | microseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.36.6.17.1.32 |
| adGenCSMDirectionCbrClassScheduling Direction-wide scheduling algorythm to use for the CBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from th… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.17.1.33 |
| adGenCSMDirectionRtVbrClassScheduling Direction-wide scheduling algorythm to use for the rtVBR class of
service. Changing the scheduling algorythms is a significant event
and requires a restart of the CSM to take eff… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.17.1.34 |
| adGenCSMDirectionNrtVbrClassScheduling Direction-wide scheduling algorythm to use for the nrtVBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.17.1.35 |
| adGenCSMDirectionUbrClassScheduling Direction-wide scheduling algorythm to use for the UBR class of
service.
If the override flag is set to false, then this value is read-only
and is inherited from th… | column | AdGenCSMClassScheduling | .1.3.6.1.4.1.664.5.36.6.17.1.36 |
| adGenCSMDirectionDefaultCDVTOverride Flag indicating if the default CDVT value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.37 |
| adGenCSMDirectionAisRdiDisableOverride Flag indicating if the AIS/RDI Disable value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.38 |
| adGenCSMDirectionInputCdvOverride Flag indicating if the Input CDV value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.39 |
| adGenCSMDirectionBufferCACDisable Flag indicating if CAC failures due to buffer threshold
calculations should be disabled if the associated direction
override flag is set to true. If the override flag is set to
f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.4 |
| adGenCSMDirectionOutputCdvOverride Flag indicating if the Output CDV value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.40 |
| adGenCSMDirectionInputMaxCtdOverride Flag indicating if the Input Max CTD value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.41 |
| adGenCSMDirectionOutputMaxCtdOverride Flag indicating if the Output Max CTD value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.42 |
| adGenCSMDirectionCbrClassSchedulingOverride Flag indicating if the CBR Class Scheduling value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.43 |
| adGenCSMDirectionRtVbrClassSchedulingOverride Flag indicating if the rtVBR Class Scheduling value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.44 |
| adGenCSMDirectionNrtVbrClassSchedulingOverride Flag indicating if the nrtVBR Class Scheduling value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.45 |
| adGenCSMDirectionUbrClassSchedulingOverride Flag indicating if the UBR Class Scheduling value should
override the setting of the associated Shelf value. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.36.6.17.1.46 |
| adGenCSMDirectionCbrOverbooking Direction specific overbooking/oversubscription percentage for
the CBR traffic class if the associated direction override flag
is set to true. If the override flag is set to fals… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.5 |
| adGenCSMDirectionRtVbrOverbooking Direction specific overbooking/oversubscription percentage for
the rtVBR traffic class if the associated direction override flag
is set to true. If the override flag is set to fa… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.6 |
| adGenCSMDirectionNrtVbrOverbooking Direction specific overbooking/oversubscription percentage for
the nrtVBR traffic class if the associated direction override flag
is set to true. If the override flag is set to f… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.7 |
| adGenCSMDirectionNrtVbrSharing Direction specific buffer sharing percentage for the nrtVBR
traffic class if the associated direction override flag is set
to true. If the override flag is set to false, then thi… | column | percent Integer32 | .1.3.6.1.4.1.664.5.36.6.17.1.9 |