adGenFrPVCMtu

ADTRAN-GEN-FRAME-RELAY-MIB · .1.3.6.1.4.1.664.5.70.29.1.3.4.1.29
MIB view Table view

Object

column r/w Octets Integer32 
The size of the largest packet which can be
sent/received on the interface, specified in octets.
For a PVC, this is the size of the frame relay payload
and does not count the HDLC start/end flags, Frame Relay
address field, or the CRC-16 trailer.

Context

MIB
ADTRAN-GEN-FRAME-RELAY-MIB
OID
.1.3.6.1.4.1.664.5.70.29.1.3.4.1.29
Type
column
Access
readwrite
Status
current
Units
Octets
Parent
adGenFrPVCEntry
Table
adGenFrPVCTable
Siblings
22

Syntax

Octets Integer32

Values & Constraints

Object Constraints
range: 262-1600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenFrPVCIfIndex
The value of this object is equal to the ifIndex value for this PVC end-point.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.664.5.70.29.1.3.4.1.1
adGenFrPVCSecondaryPeerIpAddress
Provisioned Secondary Peer IP address. If this object is set to a valid non-zero IP address and Inverse ARP is enabled, the address much match that learned from the Inverse ARP p…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.664.5.70.29.1.3.4.1.10
adGenFrPVCPrimaryGatewayAddressType
IP address type (ipv4 or ipv6) represented by in the adGenFrPVCPrimaryGatewayAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.664.5.70.29.1.3.4.1.11
adGenFrPVCPrimaryGatewayAddress
The primary gateway IP address for the peer. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.664.5.70.29.1.3.4.1.12
adGenFrPVCInverseArpEnable
Setting this value to true enables transmission of Inverse ARP requests by this frame relay PVC. If the encapsulation protocol is not ipv4, this oid has no effect. Note that if…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.70.29.1.3.4.1.19
adGenFrPVCDLCIIndex
The value of this object is equal to the DLCI value for this PVC end-point. The values are restricted to the legal range for the size of address field supported by …
columnInteger32.1.3.6.1.4.1.664.5.70.29.1.3.4.1.2
adGenFrPVCLearnedPrimaryPeerIpAddressType
Learned IP address type (ipv4 or ipv6) represented by in the adGenFrPVCLearnedPrimaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 or …
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.664.5.70.29.1.3.4.1.20
adGenFrPVCLearnedPrimaryPeerIpAddress
Learned Primary Peer IP address. This value is learned through the Inverse ARP protocol mechanism.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.664.5.70.29.1.3.4.1.21
adGenFrPVCLearnedSecondaryPeerAddressType
Learned IP address type (ipv4 or ipv6) represented by in the adGenFrPVCLearnedSecondaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 o…
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.664.5.70.29.1.3.4.1.22
adGenFrPVCLearnedSecondaryPeerIpAddress
Learned Secondary Peer IP address. This value is learned through the Inverse ARP protocol mechanism.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.664.5.70.29.1.3.4.1.23
adGenFrPVCClearCounters
Writing a value of 1 will reset the PVC statistics for this logical port.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.3.4.1.24
adGenFrPVCClearPmHistory
Writing a value of 1 will reset the interface performance monitoring statistics/intervals for this logical port.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.3.4.1.25
adGenFrPVCOperStatus
The current operational state of the PVC.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.3.4.1.26
adGenFrPVCLastChange
The value of sysUpTime at the time the PVC entered its current operational state. If the current state was entered prior to the last re-initialization of the local network manage…
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.664.5.70.29.1.3.4.1.27
adGenFrPVCDescription
A descriptive name for the PVC
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.70.29.1.3.4.1.28
adGenFrPVCStatusString
The reason, if any, why the why the PVC is not in an operational state due to provisioning or hardware limitations.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.70.29.1.3.4.1.3
adGenFrPVCAdminStatus
The desired state of the frame relay PVC. This object must be set to up(1) or testing(3) to enable user data transmission on the PVC.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.3.4.1.4
adGenFrPVCState
This object provides the operation state information of the PVC.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.3.4.1.5
adGenFrPVCEncapsulation
The network protocol encapsulated on this frame relay PVC.
columnEnumeration.1.3.6.1.4.1.664.5.70.29.1.3.4.1.6
adGenFrPVCPrimaryPeerIpAddressType
IP address type (ipv4 or ipv6) represented by in the adGenFrPVCPrimaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.664.5.70.29.1.3.4.1.7
adGenFrPVCPrimaryPeerIpAddress
Provisioned Primary Peer IP address. If this object is set to a valid non-zero IP address and Inverse ARP is enabled, the address much match that learned from the Inverse ARP pro…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.664.5.70.29.1.3.4.1.8
adGenFrPVCSecondaryPeerAddressType
IP address type (ipv4 or ipv6) represented by in the adGenFrPVCSecondaryPeerIpAddress column. This oid is only significant if the adGenFrPVCEncapsulation is ipv4 or ipv6.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.664.5.70.29.1.3.4.1.9