adGenFrPVCDLCIIndex
ADTRAN-GEN-FRAME-RELAY-MIB ·
.1.3.6.1.4.1.664.5.70.29.1.3.4.1.2
Object
column
Integer32
The value of this object is equal to the DLCI
value for this PVC end-point.
The values are restricted to the legal range for
the size of address field supported by the
application which is currently 10-bits.
Context
- MIB
- ADTRAN-GEN-FRAME-RELAY-MIB
- OID
.1.3.6.1.4.1.664.5.70.29.1.3.4.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenFrPVCEntry
- Table
- adGenFrPVCTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 16-991
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenFrPVCIfIndex The value of this object is equal to the ifIndex
value for this PVC end-point. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.1 |
| adGenFrPVCSecondaryPeerIpAddress Provisioned Secondary Peer IP address. If this object
is set to a valid non-zero IP address and Inverse ARP
is enabled, the address much match that learned from
the Inverse ARP p… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.10 |
| adGenFrPVCPrimaryGatewayAddressType IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCPrimaryGatewayAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.11 |
| adGenFrPVCPrimaryGatewayAddress The primary gateway IP address for the peer. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.12 |
| adGenFrPVCInverseArpEnable Setting this value to true enables transmission of Inverse ARP
requests by this frame relay PVC. If the encapsulation protocol
is not ipv4, this oid has no effect. Note that if… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.19 |
| adGenFrPVCLearnedPrimaryPeerIpAddressType Learned IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCLearnedPrimaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or … | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.20 |
| adGenFrPVCLearnedPrimaryPeerIpAddress Learned Primary Peer IP address. This value
is learned through the Inverse ARP protocol mechanism. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.21 |
| adGenFrPVCLearnedSecondaryPeerAddressType Learned IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCLearnedSecondaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 o… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.22 |
| adGenFrPVCLearnedSecondaryPeerIpAddress Learned Secondary Peer IP address. This value
is learned through the Inverse ARP protocol mechanism. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.23 |
| adGenFrPVCClearCounters Writing a value of 1 will reset the PVC statistics for
this logical port. | column | Enumeration | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.24 |
| adGenFrPVCClearPmHistory Writing a value of 1 will reset the interface performance
monitoring statistics/intervals for this logical port. | column | Enumeration | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.25 |
| adGenFrPVCOperStatus The current operational state of the PVC. | column | Enumeration | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.26 |
| adGenFrPVCLastChange The value of sysUpTime at the time the PVC
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network manage… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.27 |
| adGenFrPVCDescription A descriptive name for the PVC | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.28 |
| adGenFrPVCMtu The size of the largest packet which can be
sent/received on the interface, specified in octets.
For a PVC, this is the size of the frame relay payload
and does not count the HDLC… | column | Octets Integer32 | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.29 |
| adGenFrPVCStatusString The reason, if any, why the why the PVC is not in an
operational state due to provisioning or hardware limitations. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.3 |
| adGenFrPVCAdminStatus The desired state of the frame relay PVC. This object
must be set to up(1) or testing(3) to enable user data
transmission on the PVC. | column | Enumeration | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.4 |
| adGenFrPVCState This object provides the operation state information of
the PVC. | column | Enumeration | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.5 |
| adGenFrPVCEncapsulation The network protocol encapsulated on this frame relay PVC. | column | Enumeration | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.6 |
| adGenFrPVCPrimaryPeerIpAddressType IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCPrimaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.7 |
| adGenFrPVCPrimaryPeerIpAddress Provisioned Primary Peer IP address. If this object
is set to a valid non-zero IP address and Inverse ARP
is enabled, the address much match that learned from
the Inverse ARP pro… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.8 |
| adGenFrPVCSecondaryPeerAddressType IP address type (ipv4 or ipv6) represented by in the
adGenFrPVCSecondaryPeerIpAddress column. This oid is only
significant if the adGenFrPVCEncapsulation is ipv4 or ipv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.664.5.70.29.1.3.4.1.9 |