adGenEthPortBreakoutModeStatus

ADTRAN-GEN-ETH-IFC-MIB · .1.3.6.1.4.1.664.5.70.15.1.1.1.18

MIB view Table view

Object

column Enumeration

Reports the status of the last set operation to adGenEthPortBreakoutMode.
The notDone status is returned while the operation is still in progress.
Every status except notDone implies the operation is complete.

Context

MIB: ADTRAN-GEN-ETH-IFC-MIB
OID: .1.3.6.1.4.1.664.5.70.15.1.1.1.18
Type: column
Access: readonly
Status: current
Parent: adGenEthProvEntry
Table: adGenEthProvTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`-6`	notDone
`-5`	internalError
`-4`	invalidPort
`-3`	portNotDisabled
`-2`	modeNotSupported
`-1`	breakoutNotSupported
`0`	success

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adGenEthPortSpeed deprecated Provisions the speed for the selected ethernet port. Previously auto(1) was used to enable auto-negotiation, but that usage became outdated; therefore this OID's status has change…	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.1`
adGenEthAdvertisedDuplexFiber If adGenEthAutoNegotiateFiber = 2 (false), then duplex is forced . If adGenEthAutoNegotiateFiber = 1 (true), then auto-negotiation is enabled and capabilities are advertised as s…	column	Bits	`.1.3.6.1.4.1.664.5.70.15.1.1.1.11`
adGenEthPortYCableEnable Enable or disable Y-Cable. TruthValue of 1 is true/enable which implies that a Y-Cable is being used for this port. TruthValue of 2 is false/disable …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.70.15.1.1.1.12`
adGenEthSpeedScanAlarmEnable Enable or disable Speed Scan alarm. TruthValue of 1 is true/enable which implies that the Speed Scan alarm is enabled for this port. TruthValue of 2 …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.70.15.1.1.1.13`
adGenEthSpeedScanAlarmSeverityLevel Provision the severity level of Speed Scan alarm.	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.14`
adGenEthPortBreakoutMode Provision the port breakout mode (if supported) by a given port. For 40Gbps interfaces which support breakout operation, 1x40Gbps mode is implied by the disable(1) option. The res…	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.15`
adGenEthPortBreakoutModesSupported Indicates whether or not this port supports breakout operation where the lanes of the port are split into multiple logical ports. If the port doesn't support breakout mode then no…	column	Bits	`.1.3.6.1.4.1.664.5.70.15.1.1.1.16`
adGenEthForwardErrorCorrection Enable or disable FEC on this interface.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.70.15.1.1.1.17`
adGenEthPortDuplex deprecated Provisions the duplex for the selected ethernet port. The use of auto(1) to enable auto-negotiation became outdated; therefore this OID's status has changed to deprecated. See adG…	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.2`
adGenEthLinkUpDownTrapEnable Indicates whether adGenEthIfcLinkUp/LinkDown traps should be generated for this interface.	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.3`
adGenEthPortFixedSpeed Provisions the speed for the selected ethernet port fixedSpeedScan(7) activates an Adtran-specific speed-scan algorithm to detect an appropriate fixed speed. (a) in all cases for …	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.4`
adGenEthPortFixedDuplex Provisions the duplex for the selected ethernet port when the appropriate autonegotiation OID, adGenEthAutoNegotiateCu or adGenEthAutoNegotiateFiber, is set to false.	column	Enumeration	`.1.3.6.1.4.1.664.5.70.15.1.1.1.5`
adGenEthAutoNegotiateCu Enable or disable auto-negotiation. TruthValue of 1 is true/enable which implies that capabilities are advertised as selected (see adGenEthAdvertisedSpeedAndDuplexCu; note that ad…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.70.15.1.1.1.6`
adGenEthAdvertisedSpeedAndDuplexCu If adGenEthAutoNegotiateCu = 2 (false), then speed and duplex are forced. If adGenEthAutoNegotiateCu = 1 (true), then auto-negotiation is enabled and capabilities are advertised a…	column	Bits	`.1.3.6.1.4.1.664.5.70.15.1.1.1.8`
adGenEthAutoNegotiateFiber Enable or disable auto-negotiation. TruthValue of 1 is true/enable which implies that duplex capabilities are advertised as selected (see adGenEthAdvertisedDuplexFiber; note that …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.664.5.70.15.1.1.1.9`