adGenEthCurrentInterfaceType
ADTRAN-GEN-ETH-IFC-MIB ·
.1.3.6.1.4.1.664.5.70.15.2.1.1.5
Object
column
ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType
The initial purpose of this variable is to identify ethernet vs. gigabit ethernet interfaces. However it could be used to identify additional types later as GenSystemInterfaceType defines many types.
Context
- MIB
- ADTRAN-GEN-ETH-IFC-MIB
- OID
.1.3.6.1.4.1.664.5.70.15.2.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- adGenEthStatusEntry
- Table
- adGenEthStatusTable
- Siblings
- 10
Syntax
ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType
- Source
- ADTRAN-SHARED-CND-SYSTEM-TC-MIBGenSystemInterfaceType
- Base type
Enumeration
Values & Constraints
Type Values
1 | unknown |
2 | ds1 |
3 | dsx1 |
4 | e1 |
5 | dsxE1 |
6 | gigabitEthernet |
7 | ds3 |
8 | portChannel |
9 | tenGigabitEthernet |
10 | erps |
11 | shdsl |
12 | adsl |
13 | vdsl |
14 | efmGroup |
15 | efmLink |
16 | efmPort |
17 | lagGroup |
18 | pppGroup |
19 | imaGroup |
20 | imaLink |
21 | atm |
22 | fxs |
23 | hdsl2 |
24 | hdsl4 |
25 | adsl2 |
26 | vdsl2 |
27 | ethernet |
28 | fast |
29 | interleave |
30 | hdsl |
31 | gpon |
32 | ipHost |
33 | frpvc |
34 | sonet |
35 | otn |
36 | wan |
37 | defaultEthernet |
38 | genericBridge |
39 | fibreChannel |
40 | otnTenGigabitEthernet |
41 | hundredGigabitEthernet |
42 | otnHundredGigabitEthernet |
43 | xgigabitEthernet |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenEthCurrentSpeed Returns the current speed for the selected ethernet port. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.2.1.1.1 |
| adGenEthAlarmStatus A bit-map representing the current ETH alarm status of the specified port.
The bit positions are:
0 - no alarm
1 - LOS
2 - LOBS
3 - HIBER
4 - LCLFLT
5 - REMFLT | column | Bits | .1.3.6.1.4.1.664.5.70.15.2.1.1.10 |
| adGenEthLastError Displays details of the latest error experienced by this particular entry. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.70.15.2.1.1.11 |
| adGenEthCurrentDuplex Returns the current duplex mode for the selected ethernet port. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.2.1.1.2 |
| adGenEthCurrentAutoNeg Returns whether autonegotiation is currently enabled on the selected port. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.2.1.1.3 |
| adGenEthCurrentAutoNegStatus Returns the current auto-negotiation status for the selected ethernet port.
notApplicable(1) - port provisioned to no auto-negotiation
incomplete(2) - port provisioned to auto-… | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.2.1.1.4 |
| adGenEthInterfaceCuOrFiber Returns the physical type, copper or fiber, of the ethernet interface. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.2.1.1.6 |
| adGenEthInterfaceFixedOrPluggable Returns the mechanical type, fixed or pluggable, of the ethernet
interface/port. If pluggable, then see adGenPluggablePort.mi2. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.2.1.1.7 |
| adGenEthValid15MinIntervals The number of valid 15-minute performance monitoring intervals for this interface.
This value represents the maximum valid value of adGenEth15MinIntervalNumber in adGenEth15MinInt… | column | Integer32 | .1.3.6.1.4.1.664.5.70.15.2.1.1.8 |
| adGenEthValid24HrIntervals The number of valid 24-hour performance monitoring intervals for this interface.
This value represents the maximum valid value of adGenEth24HrIntervalNumber in adGenEth24HrInterva… | column | Integer32 | .1.3.6.1.4.1.664.5.70.15.2.1.1.9 |