adGenEthAdvertisedDuplexFiber
ADTRAN-GEN-ETH-IFC-MIB ·
.1.3.6.1.4.1.664.5.70.15.1.1.1.11
Object
column
r/w
Bits
If adGenEthAutoNegotiateFiber = 2 (false), then duplex is forced . If adGenEthAutoNegotiateFiber = 1 (true), then auto-negotiation is enabled and capabilities are advertised as selected here. Set bits to 1 to advertise each capability and clear bits to 0 to NOT advertise each capability as appropriate.
Context
- MIB
- ADTRAN-GEN-ETH-IFC-MIB
- OID
.1.3.6.1.4.1.664.5.70.15.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenEthProvEntry
- Table
- adGenEthProvTable
- Siblings
- 15
Syntax
Bits
Values & Constraints
Enumerated Values
0 | fiberFullDuplex |
1 | fiberHalfDuplex |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenEthPortSpeed deprecated Provisions the speed for the selected ethernet port.
Previously auto(1) was used to enable auto-negotiation,
but that usage became outdated; therefore this
OID's status has change… | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.1 |
| adGenEthPortYCableEnable Enable or disable Y-Cable.
TruthValue of 1 is true/enable which implies that a Y-Cable is being
used for this port.
TruthValue of 2 is false/disable … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.15.1.1.1.12 |
| adGenEthSpeedScanAlarmEnable Enable or disable Speed Scan alarm.
TruthValue of 1 is true/enable which implies that the Speed Scan alarm is enabled for this port.
TruthValue of 2 … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.15.1.1.1.13 |
| adGenEthSpeedScanAlarmSeverityLevel Provision the severity level of Speed Scan alarm. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.14 |
| adGenEthPortBreakoutMode Provision the port breakout mode (if supported) by a given port.
For 40Gbps interfaces which support breakout operation,
1x40Gbps mode is implied by the disable(1) option. The res… | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.15 |
| adGenEthPortBreakoutModesSupported Indicates whether or not this port supports breakout operation where the
lanes of the port are split into multiple logical ports. If the port
doesn't support breakout mode then no… | column | Bits | .1.3.6.1.4.1.664.5.70.15.1.1.1.16 |
| adGenEthForwardErrorCorrection Enable or disable FEC on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.15.1.1.1.17 |
| adGenEthPortBreakoutModeStatus Reports the status of the last set operation to adGenEthPortBreakoutMode.
The notDone status is returned while the operation is still in progress.
Every status except notDone impl… | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.18 |
| adGenEthPortDuplex deprecated Provisions the duplex for the selected ethernet port.
The use of auto(1) to enable auto-negotiation became outdated;
therefore this OID's status has changed to deprecated. See
adG… | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.2 |
| adGenEthLinkUpDownTrapEnable Indicates whether adGenEthIfcLinkUp/LinkDown traps should
be generated for this interface. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.3 |
| adGenEthPortFixedSpeed Provisions the speed for the selected ethernet port
fixedSpeedScan(7) activates an Adtran-specific speed-scan algorithm to
detect an appropriate fixed speed.
(a) in all cases for … | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.4 |
| adGenEthPortFixedDuplex Provisions the duplex for the selected ethernet port when the appropriate
autonegotiation OID, adGenEthAutoNegotiateCu or adGenEthAutoNegotiateFiber,
is set to false. | column | Enumeration | .1.3.6.1.4.1.664.5.70.15.1.1.1.5 |
| adGenEthAutoNegotiateCu Enable or disable auto-negotiation. TruthValue of 1 is
true/enable which implies that capabilities are advertised
as selected (see adGenEthAdvertisedSpeedAndDuplexCu;
note that ad… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.15.1.1.1.6 |
| adGenEthAdvertisedSpeedAndDuplexCu If adGenEthAutoNegotiateCu = 2 (false), then speed and duplex are forced. If
adGenEthAutoNegotiateCu = 1 (true), then auto-negotiation is enabled and
capabilities are advertised a… | column | Bits | .1.3.6.1.4.1.664.5.70.15.1.1.1.8 |
| adGenEthAutoNegotiateFiber Enable or disable auto-negotiation. TruthValue of 1 is true/enable
which implies that duplex capabilities are advertised as selected
(see adGenEthAdvertisedDuplexFiber; note that
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.664.5.70.15.1.1.1.9 |