adGenEfmProvGroupSkewThreshold

ADTRAN-EFM-MIB · .1.3.6.1.4.1.664.5.66.1.3.2.1.3
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
This option is used to enter the maximum allowable skew
threshold (in milliseconds) for each bonding group.  To disable
this option, enter 0.  Skew thresholds from 1 millisecond
to 16 milliseconds (in 1 millisecond intervals) can be selected.
The default skew threshold is 4 milliseconds.
              
A link will automatically be removed from a EFM group if the
relative skew exceeds the specified threshold.  The link will
automatically be added back to the group once the relative skew
is below the threshold (plus 0.50 millisecond of hysteresis).

Context

MIB
ADTRAN-EFM-MIB
OID
.1.3.6.1.4.1.664.5.66.1.3.2.1.3
Type
column
Access
readwrite
Status
current
Parent
adGenEfmProvGroupEntry
Table
adGenEfmProvGroupTable
Siblings
10

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenEfmProvGroupServiceState
This entry gets/sets the service state of the selected EFM Group.
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.1
adGenEfmProvGroupTrapReportingGroupPartial
This entry is used to disable the EFM group partial trap. This object is enabled(2) by default.
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.10
adGenEfmProvGroupDownlinkEnable
This entry is used to enable or disable the downlink functionality of an EFM group. If set to true, then downstream tree networking will be enabled for the EFM group. This object …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.664.5.66.1.3.2.1.11
adGenEfmProvGroupFragmentSize
This entry gets/sets the fragment size used in the EFM Group. Valid ranges are 64 to 512 bytes.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.66.1.3.2.1.2
adGenEfmProvGroupXCVThreshold
This option is used to select the XCV threshold. A link will automatically be removed from a bonding group if the XCV rate exceeds the specified threshold. The link will automat…
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.4
adGenEfmProvGroupName
This object sets a display name associated with the selected EFM group.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.66.1.3.2.1.5
adGenEfmProvGroupCRCMode
This option is used to read or write the EFM fragment CRC mode for each bonding group.
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.6
adGenEfmProvGroupXCVLinkRemoval
This option is used to specify if a link is to be removed from the group when the XCV threshold has been exceeded.
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.7
adGenEfmProvGroupLoopbackDetection
This option is used to specify if loopback detection is used on each link in the EFM group.
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.8
adGenEfmProvGroupTrapReportingGroupDown
This entry is used to disable the EFM group down trap. This object is enabled(2) by default.
columnEnumeration.1.3.6.1.4.1.664.5.66.1.3.2.1.9