adsl2ChConfProfImaEnabled
ADSL2-LINE-MIB ·
.1.3.6.1.2.1.10.238.1.5.2.1.1.19
Object
IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data Path. When in 'enable' state, the ATM data path should comply with the requirements for IMA transmission.
Context
- MIB
- ADSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.238.1.5.2.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adsl2ChConfProfileEntry
- Table
- adsl2ChConfProfileTable
- Siblings
- 19
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adsl2ChConfProfProfileName This object identifies a row in this table. | column | OctetString | .1.3.6.1.2.1.10.238.1.5.2.1.1.1 |
| adsl2ChConfProfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The ATUs shall choose the S (factor) and
D… | column | milliseconds Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.10 |
| adsl2ChConfProfMinProtectionDs Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following… | column | symbols ADSL2-LINE-TC-MIBAdsl2SymbolProtection | .1.3.6.1.2.1.10.238.1.5.2.1.1.11 |
| adsl2ChConfProfMinProtectionUs Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
v… | column | symbols ADSL2-LINE-TC-MIBAdsl2SymbolProtection | .1.3.6.1.2.1.10.238.1.5.2.1.1.12 |
| adsl2ChConfProfMaxBerDs Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
emi… | column | ADSL2-LINE-TC-MIBAdsl2MaxBer | .1.3.6.1.2.1.10.238.1.5.2.1.1.13 |
| adsl2ChConfProfMaxBerUs Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7):
eminu… | column | ADSL2-LINE-TC-MIBAdsl2MaxBer | .1.3.6.1.2.1.10.238.1.5.2.1.1.14 |
| adsl2ChConfProfUsDataRateDs Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the actual
downstream data rate exceeds, by more than the threshold, the
… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.15 |
| adsl2ChConfProfDsDataRateDs Data Rate Threshold Down-shift for downstream direction. A
'Down-shift rate change' event is triggered when the actual
downstream data rate is below the data rate at the last ent… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.16 |
| adsl2ChConfProfUsDataRateUs Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the actual
upstream data rate exceeds, by more than the threshold, the
data… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.17 |
| adsl2ChConfProfDsDataRateUs Data Rate Threshold Down-shift for upstream direction. A
'Down-shift rate change' event is triggered when the actual
upstream data rate is below the data rate at the last entry
i… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.18 |
| adsl2ChConfProfMinDataRateDs Minimum Data Rate on Downstream direction. The minimum net
data rate for the bearer channel, coded in bits/second. | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.2 |
| adsl2ChConfProfRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.238.1.5.2.1.1.20 |
| adsl2ChConfProfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net data
rate for the bearer channel, coded in bits/second. | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.3 |
| adsl2ChConfProfMinResDataRateDs Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded
in bits/second. This parameter is used only if the Rate
Adap… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.4 |
| adsl2ChConfProfMinResDataRateUs Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in
bits/second. This parameter is used only if the Rate
Adapta… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.5 |
| adsl2ChConfProfMaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net
data rate for the bearer channel, coded in bits/second. | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.6 |
| adsl2ChConfProfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net data
rate for the bearer channel, coded in bits/second. | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.7 |
| adsl2ChConfProfMinDataRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in
bits/second, during the low power state (L1 in G.992.2, L2… | column | bits/second Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.8 |
| adsl2ChConfProfMaxDelayDs Maximum Interleave Delay on Downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The ATUs shall choose the S (factor)
a… | column | milliseconds Unsigned32 | .1.3.6.1.2.1.10.238.1.5.2.1.1.9 |