ausArrayTaskPriority
ADAPTEC-UNIVERSAL-STORAGE-MIB ·
.1.3.6.1.4.1.795.14.1.1000.1.1.8
Object
column
mandatory
Enumeration
Priority of the running task (if any).
Context
- MIB
- ADAPTEC-UNIVERSAL-STORAGE-MIB
- OID
.1.3.6.1.4.1.795.14.1.1000.1.1.8- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ausArrayEntry
- Table
- ausArrayTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | other |
3 | notSupported |
4 | notApplicable |
5 | none |
6 | low |
7 | medium |
8 | high |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ausArrayIndex mandatory A unique index value for each array beginning with 1. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.1 |
| ausArrayHostingControllerIndex mandatory This field associates this array with its hosting
controller. if the ausArrayControllerType field equals
physicalController, then this field is an index into the
ausController ta… | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.10 |
| ausArrayStatus mandatory Current health of this array. | column | ObjectStatus | .1.3.6.1.4.1.795.14.1.1000.1.1.11 |
| ausArrayState mandatory Current health of this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.12 |
| ausArrayCacheStatus mandatory Current write cache status of this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.13 |
| ausArrayMembership mandatory For non-composite arrays (e.g., a straight mirror,
RAID-1, set) this field is always 0. For composite
arrays (e.g. stripe set of mirrors, RAID-10) this field
indicates the posit… | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.14 |
| ausArrayID mandatory The ID of this array on its hosting controller. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.15 |
| ausStandByTimer mandatory Period of inactivity, from 3 minutes to 3 hours,
after which the drives spin rate is lowered.
The default is zero. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.17 |
| ausPowerOffTimer mandatory Period of inactivity, from 3 minutes to 3 hours,
after which the disk drives are turned off.
The default is zero. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.18 |
| ausVerifyTimer mandatory Period of inactivity, from 1 hour to 24 hours.
after which an inactive drive (a drive that is already powered down)
is restarted and checked to verify its health. Once the check … | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.19 |
| ausArrayName mandatory The name assigned to this array. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.795.14.1.1000.1.1.2 |
| ausArrayCapacity mandatory Capacity of this array in megabytes. This is data
(usable) size, not the sum of all extents. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.3 |
| ausArrayType mandatory RAID level used by this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.4 |
| ausArrayStripeSize mandatory Stripe size used by this array. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.5 |
| ausArrayTaskStatus mandatory Task status of this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.6 |
| ausArrayTaskCompletion mandatory Percentage completion of running task, if any. Reports
as 100 if no task is active. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.7 |
| ausArrayHostingControllerType mandatory This field tells whether the hosting controller for this
array is an actual physical controller, an aggregate
controller (multiple controllers made to look like one
through softwa… | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.9 |