ausArrayHostingControllerType
ADAPTEC-UNIVERSAL-STORAGE-MIB ·
.1.3.6.1.4.1.795.14.1.1000.1.1.9
Object
column
mandatory
Enumeration
This field tells whether the hosting controller for this array is an actual physical controller, an aggregate controller (multiple controllers made to look like one through software), or an external RAID controller. This field is used to select the meaning of the following ausArrayControllerIndex field.
Context
- MIB
- ADAPTEC-UNIVERSAL-STORAGE-MIB
- OID
.1.3.6.1.4.1.795.14.1.1000.1.1.9- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ausArrayEntry
- Table
- ausArrayTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | physicalController |
2 | aggregateController |
3 | externalRaidController |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ausArrayIndex mandatory A unique index value for each array beginning with 1. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.1 |
| ausArrayHostingControllerIndex mandatory This field associates this array with its hosting
controller. if the ausArrayControllerType field equals
physicalController, then this field is an index into the
ausController ta… | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.10 |
| ausArrayStatus mandatory Current health of this array. | column | ObjectStatus | .1.3.6.1.4.1.795.14.1.1000.1.1.11 |
| ausArrayState mandatory Current health of this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.12 |
| ausArrayCacheStatus mandatory Current write cache status of this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.13 |
| ausArrayMembership mandatory For non-composite arrays (e.g., a straight mirror,
RAID-1, set) this field is always 0. For composite
arrays (e.g. stripe set of mirrors, RAID-10) this field
indicates the posit… | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.14 |
| ausArrayID mandatory The ID of this array on its hosting controller. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.15 |
| ausStandByTimer mandatory Period of inactivity, from 3 minutes to 3 hours,
after which the drives spin rate is lowered.
The default is zero. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.17 |
| ausPowerOffTimer mandatory Period of inactivity, from 3 minutes to 3 hours,
after which the disk drives are turned off.
The default is zero. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.18 |
| ausVerifyTimer mandatory Period of inactivity, from 1 hour to 24 hours.
after which an inactive drive (a drive that is already powered down)
is restarted and checked to verify its health. Once the check … | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.19 |
| ausArrayName mandatory The name assigned to this array. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.795.14.1.1000.1.1.2 |
| ausArrayCapacity mandatory Capacity of this array in megabytes. This is data
(usable) size, not the sum of all extents. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.3 |
| ausArrayType mandatory RAID level used by this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.4 |
| ausArrayStripeSize mandatory Stripe size used by this array. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.5 |
| ausArrayTaskStatus mandatory Task status of this array. | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.6 |
| ausArrayTaskCompletion mandatory Percentage completion of running task, if any. Reports
as 100 if no task is active. | column | Integer32 | .1.3.6.1.4.1.795.14.1.1000.1.1.7 |
| ausArrayTaskPriority mandatory Priority of the running task (if any). | column | Enumeration | .1.3.6.1.4.1.795.14.1.1000.1.1.8 |