statusRoaming
ACKSYS-MIB ·
.1.3.6.1.4.1.28097.7.13
Object
node
No description available.
Context
- MIB
- ACKSYS-MIB
- OID
.1.3.6.1.4.1.28097.7.13- Type
- node
- Parent
- networkStatus
- Siblings
- 12
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| statusIpSubnetTable A table that contains information of logical networks (level 3).
[FW:E2148.AC.1:3.14.0.1] | table | - | .1.3.6.1.4.1.28097.7.1 |
| statusPhyLanTable A table that contains information of physical ethernet adapter.
[FW:E2148.AC.1:3.12.0.1] | table | - | .1.3.6.1.4.1.28097.7.10 |
| statusMeshSurveyTable A table that contains information of mesh survey.
[FW:E2148.AC.1:3.12.9.1] | table | - | .1.3.6.1.4.1.28097.7.11 |
| statusPhyCellTable This table contains information about cellular adapters.
[FW:E2148.AC.1:3.16.1.1] | table | - | .1.3.6.1.4.1.28097.7.12 |
| statusIfWlanTable List of Wi-Fi service sets (ESSID, ISSID)
with an IP address
[FW:E2148.AC.1:2.8.0.1] | table | - | .1.3.6.1.4.1.28097.7.2 |
| statusPhyWifiTable This table contains information about Wi-Fi adapters.
[FW:E2148.AC.1:2.8.0.1] | table | - | .1.3.6.1.4.1.28097.7.3 |
| statusPhyWifiScanTable List of Wi-Fi access points devices around
[FW:E2148.AC.1:2.8.0.1] | table | - | .1.3.6.1.4.1.28097.7.4 |
| statusPhyWifiScanTableStart Write (any value) to start a scan. Poll the statusPhyWifiScanUpdateTbl
OID to know the status of the current scan : inprogress or available
[FW:E2148.AC.1:2.8.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.5 |
| statusPhyWifiScanUpdateTbl Returns inprogress if current scan isn't finished yet.
Returns available if the current scan results are available. In this
case, the ScanTable will be updated with the new value… | scalar | OctetString | .1.3.6.1.4.1.28097.7.6 |
| statusSpanningTreeTable A table that contains information related to STP
about every bridge
[FW:E2148.AC.1:2.8.0.1] | table | - | .1.3.6.1.4.1.28097.7.7 |
| statusSpanningTreePortTable A table that contains port-specific information
for the Spanning Tree Protocol.
[FW:E2148.AC.1:2.8.0.1] | table | - | .1.3.6.1.4.1.28097.7.8 |
| statusAssociationTable A table that contains information of associated stations.
[FW:E2148.AC.1:3.12.0.1] | table | - | .1.3.6.1.4.1.28097.7.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| statusRoamingLeaveLvlMax When current AP's signal level is above this value, roaming will occur when possible.
[FW:E2148.AC.1:4.10.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.13.1 |
| statusRoamingLeaveLvlMin When current AP's signal level is below this value, roaming will occur when possible.
[FW:E2148.AC.1:4.10.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.13.2 |
| statusRoamingRoamLvlMax When the signal level of an AP in scan result is above this value, it will not be considered as a candidate.
[FW:E2148.AC.1:4.10.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.13.3 |
| statusRoamingRoamLvlMin When the signal level of an AP in scan result is below this value, it will not be considered as a candidate.
[FW:E2148.AC.1:4.10.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.13.4 |
| statusRoamingThresHyst The hysteresis applied in all thresholds
[FW:E2148.AC.1:4.10.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.13.5 |
| statusRoamingLeaveBoost Roaming occurs only if the candidate signal level is above the current AP's plus this value.
[FW:E2148.AC.1:4.10.0.1] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.7.13.6 |
| statusRoamingActiveIf | node | - | .1.3.6.1.4.1.28097.7.13.7 |
| statusRoamingPassiveIf | node | - | .1.3.6.1.4.1.28097.7.13.8 |
| statusRoamingUrgent PLH algorithm 'Urgent' indication.
Disable: normal condition.
Enable: the current AP is below the urgent level, and there is
no candidate AP complying with the candidate selection… | scalar | DisableEnable | .1.3.6.1.4.1.28097.7.13.9 |