settingTransmisionRate

ACKSYS-MIB · .1.3.6.1.4.1.28097.1.1.1.11

MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32

Set the transmission rate in Mbps
Automatic : -1
With SuperAG Mode : 108,96,72,48,36,24,18,12
Without SuperAG mode : 54,48,36,24,18,12,9,6
802.11b mode : 11,5.5,2,1
[FW:E2080.AC.1:5.52.0]

Context

MIB: ACKSYS-MIB
OID: .1.3.6.1.4.1.28097.1.1.1.11
Type: scalar
Access: readwrite
Status: current
Parent: settings
Siblings: 16

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
settingInterfaceSsid SSID (wireless network name) [FW:E2080.AC.1:5.52.0]	scalar	OctetString	`.1.3.6.1.4.1.28097.1.1.1.1`
settingAntennaChoice Set the antenna type [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.10`
settingFlagUdapnopassword Configure LAN settings without password [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.12`
settingFlagFiltersamenet Isolate subnet filter [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.13`
settingFlagFilterframecosom Setting economy filter [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.14`
settingDFSsupport Setting DFS support [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.15`
settingFilterCustomIpAddr IP address of the custom subnet [FW:E2080.AC.1:5.52.0]	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.1.1.1.16`
settingFilterCustomSubnetMask Subnet mask of the custom subnet [FW:E2080.AC.1:5.52.0]	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.1.1.1.17`
settingInterfaceWifiMode Select between MAX-ACCESS POINT and BRIDGE [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.2`
settingInterfaceChannel A wireless network uses specific channels to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clear…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.28097.1.1.1.3`
settingInterface80211Mode Select IEEE 802.11x compatibility mode. [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.4`
settingInterfaceSuper-a-g-Mode This parameter enables the SUPER A/G mode to reach the 108 Mbits/s speed. [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.5`
settingEnableRadio Enable / Disable wifi radio [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.6`
settingTxPower Set WIFI tx power [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.7`
settingRegion Set WIFI regulation domain [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.8`
securitySettings	node	-	`.1.3.6.1.4.1.28097.1.1.1.9`