settingInterface80211Mode

ACKSYS-MIB · .1.3.6.1.4.1.28097.1.1.1.4

MIB view Table view

Object

scalar r/w Enumeration

Select IEEE 802.11x compatibility mode.
[FW:E2080.AC.1:5.52.0]

Context

MIB: ACKSYS-MIB
OID: .1.3.6.1.4.1.28097.1.1.1.4
Type: scalar
Access: readwrite
Status: current
Parent: settings
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	b-only
`2`	g-only
`3`	mixed-b-g
`4`	a-only
`10`	n-g
`11`	n-bg
`12`	n-a

Related Objects

Sibling Objects

Object	Type	Syntax	OID
settingInterfaceSsid SSID (wireless network name) [FW:E2080.AC.1:5.52.0]	scalar	OctetString	`.1.3.6.1.4.1.28097.1.1.1.1`
settingAntennaChoice Set the antenna type [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.10`
settingTransmisionRate Set the transmission rate in Mbps Automatic : -1 With SuperAG Mode : 108,96,72,48,36,24,18,12 Without SuperAG mode : 54,48,36,24,18,12,9,6 802.11b mode : 11,5.5,2,1 [FW:E2080.AC.1…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.28097.1.1.1.11`
settingFlagUdapnopassword Configure LAN settings without password [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.12`
settingFlagFiltersamenet Isolate subnet filter [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.13`
settingFlagFilterframecosom Setting economy filter [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.14`
settingDFSsupport Setting DFS support [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.15`
settingFilterCustomIpAddr IP address of the custom subnet [FW:E2080.AC.1:5.52.0]	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.1.1.1.16`
settingFilterCustomSubnetMask Subnet mask of the custom subnet [FW:E2080.AC.1:5.52.0]	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.1.1.1.17`
settingInterfaceWifiMode Select between MAX-ACCESS POINT and BRIDGE [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.2`
settingInterfaceChannel A wireless network uses specific channels to handle communication between clients. Some channels in your area may have interference from other electronic devices. Choose the clear…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.28097.1.1.1.3`
settingInterfaceSuper-a-g-Mode This parameter enables the SUPER A/G mode to reach the 108 Mbits/s speed. [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.5`
settingEnableRadio Enable / Disable wifi radio [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.6`
settingTxPower Set WIFI tx power [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.7`
settingRegion Set WIFI regulation domain [FW:E2080.AC.1:5.52.0]	scalar	Enumeration	`.1.3.6.1.4.1.28097.1.1.1.8`
securitySettings	node	-	`.1.3.6.1.4.1.28097.1.1.1.9`