configPhyCellName
ACKSYS-MIB ·
.1.3.6.1.4.1.28097.8.2.2.1.1
Object
column
NetifName
Symbolic identifier for the radio device
Context
- MIB
- ACKSYS-MIB
- OID
.1.3.6.1.4.1.28097.8.2.2.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- configPhyCellEntry
- Table
- configPhyCellTable
- Siblings
- 17
Syntax
NetifName
- Source
- NetifName
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| configPhyCellSim1Apn APN - Name of the cellular sub-service
for IP. If left empty, the default subscriber's
APN will be used | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.10 |
| configPhyCellSim1Authentication Authentication type towards the Telecom network | column | CellSecurityProtocol | .1.3.6.1.4.1.28097.8.2.2.1.11 |
| configPhyCellSim1Identity User name for PAP/CHAP authentication | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.12 |
| configPhyCellSim1Password User password for PAP/CHAP authentication | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.13 |
| configPhyCellSim2Pin PIN code required to enable the SIM card | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.14 |
| configPhyCellSim2Apn APN - Name of the cellular sub-service
for IP. If left empty, the default subscriber's
APN will be used | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.15 |
| configPhyCellSim2Authentication Authentication type towards the Telecom network | column | CellSecurityProtocol | .1.3.6.1.4.1.28097.8.2.2.1.16 |
| configPhyCellSim2Identity User name for PAP/CHAP authentication | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.17 |
| configPhyCellSim2Password User password for PAP/CHAP authentication | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.18 |
| configPhyCellLabel The label physically identifying the
plugs/indicators on the device box
[PF:wwan:0] | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.2 |
| configPhyCellDisableAtBoot Set the card to be forcibly disabled at boot time.
If set to Enable, the associated network will be
initially disabled after reboots.
If set to Disable, the associated network wil… | column | DisableEnable | .1.3.6.1.4.1.28097.8.2.2.1.3 |
| configPhyCellLogAT Enable logging of internal AT commands/responses | column | DisableEnable | .1.3.6.1.4.1.28097.8.2.2.1.4 |
| configPhyCellSIM Default SIM/UICC activated at startup
(for Dual SIM Single Standby radios) | column | Enumeration | .1.3.6.1.4.1.28097.8.2.2.1.5 |
| configPhyCellSetPIN Not implemented. New PIN code value
to set in the *currently selected* SIM card.
Reading this OID returns nothing.
WARNING 1: the corresponding configPhyCellSim(1/2)Pin
OID will r… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.6 |
| configPhyCellSetPUK Not implemented. PUK code required to reset
the PIN code of the *currently selected* SIM card to
the value of configPhyCellSetPIN.
Use this only if the SIM is locked after an exce… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.7 |
| configPhyCellSetPINStatus Not implemented.
Status of a write operation to configPhyCellSetPIN /
configPhyCellSetPUK.
set-init: no operation was requested yet
set-more: more data (PUK code) needed
set-wait:… | column | AsyncSetStatus | .1.3.6.1.4.1.28097.8.2.2.1.8 |
| configPhyCellSim1Pin PIN code required to enable the SIM card | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.28097.8.2.2.1.9 |