configIpSubnetPersistence

Object

column r/w TriState

Define the behaviour of the IP layer when the lower interface
loses its connection.
- When enabled, the IP settings (IP addresses, routes through
  this interface...) remain in place.
- When disabled, the IP settings are removed, possibly hanging
  a tunnel or requiring a DHCP negotiation when the connection
  recovers.
- When set to default, follow the legacy behaviour i.e. enabled
  for 'static' protocol configuration, disabled for 'dhcp'
  configuration.
[FW:E2148.AC.1:4.12.0.1]

Context

MIB: ACKSYS-MIB
OID: .1.3.6.1.4.1.28097.8.1.1.1.12
Type: column
Access: readwrite
Status: current
Parent: configIpSubnetEntry
Table: configIpSubnetTable
Siblings: 15

Related Objects

Sibling Objects

Object	Type	Syntax	OID
configIpSubnetName Interface attached to this subnet	column	NetifName	`.1.3.6.1.4.1.28097.8.1.1.1.1`
configIpSubnetFriendlyName Friendly name of this subnet	column	OctetString	`.1.3.6.1.4.1.28097.8.1.1.1.10`
configIpSubnetBridgeEnable Write 2 (Enable) to configure this subnet as a bridge type interface: create a bridge over specified interface(s) in this subnet. Write 1 (Disable) to configure thi…	column	DisableEnable	`.1.3.6.1.4.1.28097.8.1.1.1.11`
configIpSubnetEnable Set to Enable to install the layer 3 network. If disabled, this subnet will not be initialized (thus not useable) after the configuration is applied. [FW:E2148.AC.1:4.12.0.1]	column	DisableEnable	`.1.3.6.1.4.1.28097.8.1.1.1.13`
configIpSubnetAutoStart Define whether, after installation and initialization, the subnet is activated immediately (when configuration is applied) or only when a suitable event happens. See the 'L3 netwo…	column	TriState	`.1.3.6.1.4.1.28097.8.1.1.1.14`
configIpSubnetPeerDns If this subnet is a DHCP client, should the DNS obtained from the DHCP server replace the currently configured one? Set to 'Enable' to give preference to the DHCP-p…	column	DisableEnable	`.1.3.6.1.4.1.28097.8.1.1.1.15`
configIpSubnetDefaultRoute If this subnet is a DHCP client, should the server-provided default route replace the currently configured one? Set to 'Enable' to give preference to the DHCP serve…	column	DisableEnable	`.1.3.6.1.4.1.28097.8.1.1.1.16`
configIpSubnetRowStatus row addition/deletion support [net]	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.28097.8.1.1.1.2`
configIpAddressMode Ip address protocol of this subnet	column	Enumeration	`.1.3.6.1.4.1.28097.8.1.1.1.3`
configIpSubnetIPv4Addr IPv4 address given to the interface	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.8.1.1.1.4`
configIpSubnetIPv4Mask IPv4 subnet mask	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.8.1.1.1.5`
configIpSubnetMetric Subnet metric	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.28097.8.1.1.1.6`
configIpSubnetDnsList Space-separated list of DNS IP addresses	column	OctetString	`.1.3.6.1.4.1.28097.8.1.1.1.7`
configIpSubnetInterface Interface related to this ipSubnet. This field must be left blank for bridge interfaces	column	OctetString	`.1.3.6.1.4.1.28097.8.1.1.1.8`
configIpSubnetIPv4Gateway IPv4 gateway	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.28097.8.1.1.1.9`

`0`	default
`1`	disable
`2`	enable

Object

Context

Syntax

Values & Constraints

Related Objects