configIfStaScanPassive
ACKSYS-MIB ·
.1.3.6.1.4.1.28097.8.3.3.1.8
Object
column
r/w
DisableEnable
Not implemented yet [MAX-ACCESS:read-only]
Context
- MIB
- ACKSYS-MIB
- OID
.1.3.6.1.4.1.28097.8.3.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- configIfStaEntry
- Table
- configIfStaTable
- Siblings
- 42
Syntax
DisableEnable
- Source
- DisableEnable
- Base type
Enumeration
Values & Constraints
Type Values
1 | disable |
2 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| configIfStaName Symbolic name of the wlan.
Referred to in the general Interfaces table. | column | NetifName | .1.3.6.1.4.1.28097.8.3.3.1.1 |
| configIfStaRoamingEnableDBM Roaming is allowed when current AP signal
drops below this level (negative value, e.g. -60) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.10 |
| configIfStaRoamingRequiredBoost Roaming occurs only if the candidate signal
level is above the current AP's plus this value | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.11 |
| configIfStaRoamingScanPeriod Background scan period when roaming is enabled | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.12 |
| configIfStaSecurityMode Security policy | column | SecurityModes | .1.3.6.1.4.1.28097.8.3.3.1.13 |
| configIfStaWepKey1 WEP key 1 in hexadecimal format | column | WepKeys | .1.3.6.1.4.1.28097.8.3.3.1.14 |
| configIfStaWepKey2 WEP key 2 in hexadecimal format | column | WepKeys | .1.3.6.1.4.1.28097.8.3.3.1.15 |
| configIfStaWepKey3 WEP key 3 in hexadecimal format | column | WepKeys | .1.3.6.1.4.1.28097.8.3.3.1.16 |
| configIfStaWepKey4 WEP key 4 in hexadecimal format | column | WepKeys | .1.3.6.1.4.1.28097.8.3.3.1.17 |
| configIfStaWepKey WEP key slot selected: a value between 1 and 4 that indicates select one of the four WEP keys
Ignored if configIfStaSecurityMode is different than wep. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.18 |
| configIfStaWpaVersion WPA version.
Ignored if configIfStaSecurityMode is different than wpa-*. | column | WpaVersions | .1.3.6.1.4.1.28097.8.3.3.1.19 |
| configIfStaRowStatus row addition/deletion support
[radio] | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.28097.8.3.3.1.2 |
| configIfStaWpaCipher WPA cipher:
WPA mode supports only TKIP(1).
WPA2 mode supports only AES(2).
Mixed WPA/WPA2 mode supports only AESTKIP(3).
WPA3 mode supports only AES(2).
Mixed WP2/WPA3 mode suppo… | column | CipherTypes | .1.3.6.1.4.1.28097.8.3.3.1.20 |
| configIfStaIdentity User ID (PEAP, TTLS) | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.21 |
| configIfStaKey User password or WPA-PSK passphrase (or
WPA 64-hex key) or TLS private key password | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.22 |
| configIfStaPrivateKey TLS private key.
A GET for this OID returns a string whose first
byte is '1' if the key was uploaded, else '0' | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.23 |
| configIfStaCACert EAP certificate.
A GET for this OID returns a string whose first
byte is '1' if the key was uploaded, else '0' | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.24 |
| configIfStaEapType EAP type; eap-peap is the same as eap-ttls | column | Enumeration | .1.3.6.1.4.1.28097.8.3.3.1.25 |
| configIfStaAuthentication Authentication type for phase 2 | column | PeapSecurityProtocol | .1.3.6.1.4.1.28097.8.3.3.1.26 |
| configIfStaFastBSSTransitionActivated 802.11r support (dot11FastBSSTransitionActivated):
802.11r supports only client mode with all WPA/WPA2 policies. | column | DisableEnable | .1.3.6.1.4.1.28097.8.3.3.1.27 |
| configIfStaIgnorePreviousScansResults When scanning for APs, ignore those APs found prior to the
last scan pass | column | DisableEnable | .1.3.6.1.4.1.28097.8.3.3.1.28 |
| configIfStaRoamingRssiSmoothingFactor RSSI smoothing factor
The RSSI of the current AP is computed over the last few beacons received.
Select the importance of the last beacon relative to older ones:
the RSSI smoothin… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.29 |
| configIfStaPhy PHY index for this wlan | column | NetifName | .1.3.6.1.4.1.28097.8.3.3.1.3 |
| configIfStaRoamingBeaconTimeout Beacon timeout:
Value in beacon interval unit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.30 |
| configIfStaWpaKeyCacheLifetime Expressed in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.31 |
| configIfStaRoamingCurrentApScanThreshold In dBm, e.g. '-75'. Above (better than) this value, the
device will stop scanning. Set to 0 to scan unconditionally.
Incompatible with the Maximum signal level option. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.32 |
| configIfStaRoamingMinimumStaLevel In dBm, e.g. '-75'. 0 to disable. Roaming won't occur if
the candidate signal is below this level. Association is still
possible if no other AP is available. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.33 |
| configIfStaRoamingAboveLevelThreshold In dBm, e.g. '-30'. Leave empty or 0 to disable. Roaming
will occur when the current AP signal crosses and exceeds this
value, and there is an acceptable candidate around. This al… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.34 |
| configIfStaRoamingMaxSignalLevel In dBm, e.g. '-30'. Leave empty or 0 to disable. Must be
greater or equal to the 'Excessive signal detection threshold'.
Roaming will occur whenever the current AP signal is above… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.35 |
| configIfStaRoamingMinRoamDelay In ms. Leave empty or 0 to disable. Roaming won't occur
before this delay has elapsed since the last association. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.36 |
| configIfStaRoamingNoReturnDelay In ms. Leave empty or 0 to disable, max 180000 (3 mn).
Roaming won't occur to an AP that was left recently (before this
delay gos elapsed). The delay is cleared for APs that are n… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.37 |
| configIfStaRoamingThresholdHysteresis Value in dBm, e.g. '2'. Hysteresis used for all thresholds.
This value will be added and substracted to each threshold to set
the corresponding threshold hysteresis interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.38 |
| configIfStaRoamingOffChanMaxDelay In ms. Maximum delay offchannel (during which data must be
buffered by the associated AP). Channels will be scanned without
returning to the base channel, until this delay is exha… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.39 |
| configIfStaSsid SSID string | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.4 |
| configIfStaRoamingOffChanProbeDelay In ms. Delay for collision avoidance after a channel switch,
before sending the probe request. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.40 |
| configIfStaRoamingPerChanProbeDelay In ms. Time to wait for an answer from the access points. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.28097.8.3.3.1.41 |
| configIfStaUserCert EAP User certificate.
A GET for this OID returns a string whose first
byte is '1' if the key was uploaded, else '0' | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.42 |
| configIfStaDeauthBeforeRoamingtoNextAP Deauthenticate before roaming to next AP.
Write 2 (Enable), the previous AP stops transmission immediately, saving up bandwidth.
Write 1 (Disable), let more time for the AP contro… | column | DisableEnable | .1.3.6.1.4.1.28097.8.3.3.1.43 |
| configIfStaBssid Not implemented yet
[MAX-ACCESS:read-only] | column | PhysAddress | .1.3.6.1.4.1.28097.8.3.3.1.5 |
| configIfStaBridgingMode Bridging mode. | column | Enumeration | .1.3.6.1.4.1.28097.8.3.3.1.6 |
| configIfStaScanChannels List of radio frequencies (in MHz) scanned for the next AP discovery:
Ignored if roaming is disabled. | column | OctetString | .1.3.6.1.4.1.28097.8.3.3.1.7 |
| configIfStaRoamingEnable Global fast-handover/roaming function activation | column | DisableEnable | .1.3.6.1.4.1.28097.8.3.3.1.9 |