configIfStaRoamingRssiSmoothingFactor

ACKSYS-MIB · .1.3.6.1.4.1.28097.8.3.3.1.29
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
RSSI smoothing factor
The RSSI of the current AP is computed over the last few beacons received.
Select the importance of the last beacon relative to older ones:
the RSSI smoothing factor is a value between 1 and 16 that indicates the step of 1/16 (e.g. 3/16, 5/16 or 16/16)
It is expressed in percentage format in WEB interface:
6%(1), 13%(2), 19%(3), 25%(4),
31%(5), 38%(6), 44%(7), 50%(8),
56%(9), 63%(10), 69%(11), 75%(12),
81%(13), 88%(14), 94%(15), 100%(16)
              
Default: 19%(3)
Ignored if roaming is disabled.

Context

MIB
ACKSYS-MIB
OID
.1.3.6.1.4.1.28097.8.3.3.1.29
Type
column
Access
readwrite
Status
current
Parent
configIfStaEntry
Table
configIfStaTable
Siblings
42

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
configIfStaName
Symbolic name of the wlan. Referred to in the general Interfaces table.
columnNetifName.1.3.6.1.4.1.28097.8.3.3.1.1
configIfStaRoamingEnableDBM
Roaming is allowed when current AP signal drops below this level (negative value, e.g. -60)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.10
configIfStaRoamingRequiredBoost
Roaming occurs only if the candidate signal level is above the current AP's plus this value
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.11
configIfStaRoamingScanPeriod
Background scan period when roaming is enabled
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.12
configIfStaSecurityMode
Security policy
columnSecurityModes.1.3.6.1.4.1.28097.8.3.3.1.13
configIfStaWepKey1
WEP key 1 in hexadecimal format
columnWepKeys.1.3.6.1.4.1.28097.8.3.3.1.14
configIfStaWepKey2
WEP key 2 in hexadecimal format
columnWepKeys.1.3.6.1.4.1.28097.8.3.3.1.15
configIfStaWepKey3
WEP key 3 in hexadecimal format
columnWepKeys.1.3.6.1.4.1.28097.8.3.3.1.16
configIfStaWepKey4
WEP key 4 in hexadecimal format
columnWepKeys.1.3.6.1.4.1.28097.8.3.3.1.17
configIfStaWepKey
WEP key slot selected: a value between 1 and 4 that indicates select one of the four WEP keys Ignored if configIfStaSecurityMode is different than wep.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.18
configIfStaWpaVersion
WPA version. Ignored if configIfStaSecurityMode is different than wpa-*.
columnWpaVersions.1.3.6.1.4.1.28097.8.3.3.1.19
configIfStaRowStatus
row addition/deletion support [radio]
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.28097.8.3.3.1.2
configIfStaWpaCipher
WPA cipher: WPA mode supports only TKIP(1). WPA2 mode supports only AES(2). Mixed WPA/WPA2 mode supports only AESTKIP(3). WPA3 mode supports only AES(2). Mixed WP2/WPA3 mode suppo…
columnCipherTypes.1.3.6.1.4.1.28097.8.3.3.1.20
configIfStaIdentity
User ID (PEAP, TTLS)
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.21
configIfStaKey
User password or WPA-PSK passphrase (or WPA 64-hex key) or TLS private key password
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.22
configIfStaPrivateKey
TLS private key. A GET for this OID returns a string whose first byte is '1' if the key was uploaded, else '0'
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.23
configIfStaCACert
EAP certificate. A GET for this OID returns a string whose first byte is '1' if the key was uploaded, else '0'
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.24
configIfStaEapType
EAP type; eap-peap is the same as eap-ttls
columnEnumeration.1.3.6.1.4.1.28097.8.3.3.1.25
configIfStaAuthentication
Authentication type for phase 2
columnPeapSecurityProtocol.1.3.6.1.4.1.28097.8.3.3.1.26
configIfStaFastBSSTransitionActivated
802.11r support (dot11FastBSSTransitionActivated): 802.11r supports only client mode with all WPA/WPA2 policies.
columnDisableEnable.1.3.6.1.4.1.28097.8.3.3.1.27
configIfStaIgnorePreviousScansResults
When scanning for APs, ignore those APs found prior to the last scan pass
columnDisableEnable.1.3.6.1.4.1.28097.8.3.3.1.28
configIfStaPhy
PHY index for this wlan
columnNetifName.1.3.6.1.4.1.28097.8.3.3.1.3
configIfStaRoamingBeaconTimeout
Beacon timeout: Value in beacon interval unit.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.30
configIfStaWpaKeyCacheLifetime
Expressed in seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.31
configIfStaRoamingCurrentApScanThreshold
In dBm, e.g. '-75'. Above (better than) this value, the device will stop scanning. Set to 0 to scan unconditionally. Incompatible with the Maximum signal level option.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.32
configIfStaRoamingMinimumStaLevel
In dBm, e.g. '-75'. 0 to disable. Roaming won't occur if the candidate signal is below this level. Association is still possible if no other AP is available.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.33
configIfStaRoamingAboveLevelThreshold
In dBm, e.g. '-30'. Leave empty or 0 to disable. Roaming will occur when the current AP signal crosses and exceeds this value, and there is an acceptable candidate around. This al…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.34
configIfStaRoamingMaxSignalLevel
In dBm, e.g. '-30'. Leave empty or 0 to disable. Must be greater or equal to the 'Excessive signal detection threshold'. Roaming will occur whenever the current AP signal is above…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.35
configIfStaRoamingMinRoamDelay
In ms. Leave empty or 0 to disable. Roaming won't occur before this delay has elapsed since the last association.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.36
configIfStaRoamingNoReturnDelay
In ms. Leave empty or 0 to disable, max 180000 (3 mn). Roaming won't occur to an AP that was left recently (before this delay gos elapsed). The delay is cleared for APs that are n…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.37
configIfStaRoamingThresholdHysteresis
Value in dBm, e.g. '2'. Hysteresis used for all thresholds. This value will be added and substracted to each threshold to set the corresponding threshold hysteresis interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.38
configIfStaRoamingOffChanMaxDelay
In ms. Maximum delay offchannel (during which data must be buffered by the associated AP). Channels will be scanned without returning to the base channel, until this delay is exha…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.39
configIfStaSsid
SSID string
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.4
configIfStaRoamingOffChanProbeDelay
In ms. Delay for collision avoidance after a channel switch, before sending the probe request.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.40
configIfStaRoamingPerChanProbeDelay
In ms. Time to wait for an answer from the access points.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.28097.8.3.3.1.41
configIfStaUserCert
EAP User certificate. A GET for this OID returns a string whose first byte is '1' if the key was uploaded, else '0'
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.42
configIfStaDeauthBeforeRoamingtoNextAP
Deauthenticate before roaming to next AP. Write 2 (Enable), the previous AP stops transmission immediately, saving up bandwidth. Write 1 (Disable), let more time for the AP contro…
columnDisableEnable.1.3.6.1.4.1.28097.8.3.3.1.43
configIfStaBssid
Not implemented yet [MAX-ACCESS:read-only]
columnPhysAddress.1.3.6.1.4.1.28097.8.3.3.1.5
configIfStaBridgingMode
Bridging mode.
columnEnumeration.1.3.6.1.4.1.28097.8.3.3.1.6
configIfStaScanChannels
List of radio frequencies (in MHz) scanned for the next AP discovery: Ignored if roaming is disabled.
columnOctetString.1.3.6.1.4.1.28097.8.3.3.1.7
configIfStaScanPassive
Not implemented yet [MAX-ACCESS:read-only]
columnDisableEnable.1.3.6.1.4.1.28097.8.3.3.1.8
configIfStaRoamingEnable
Global fast-handover/roaming function activation
columnDisableEnable.1.3.6.1.4.1.28097.8.3.3.1.9