acdPaaUdpCfgPktLossThresh
ACD-PAA-MIB ·
.1.3.6.1.4.1.22420.2.5.3.1.8
Object
Allowed packet loss, in pecentage (%).
Context
- MIB
- ACD-PAA-MIB
- OID
.1.3.6.1.4.1.22420.2.5.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- acdPaaUdpCfgEntry
- Table
- acdPaaUdpCfgTable
- Siblings
- 44
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acdPaaUdpCfgID Unique value for each PAA instance. This value follows the ordering
of the status and the results table. Its value ranges from 1 to
MAXINT (4 bytes). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.1 |
| acdPaaUdpCfgOneWayDvMax Maximum allowed instantaneous delay variation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.10 |
| acdPaaUdpCfgOneWayDvThresh Number of consecutive delay variations greater than the threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.11 |
| acdPaaUdpCfgOneWayAvgDvThresh One-way average delay variation threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.12 |
| acdPaaUdpCfgTwoWayRefPeriod Reference period in milliseconds for two-way measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.13 |
| acdPaaUdpCfgTwoWayDelayMax Maximum allowed instantaneous delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.14 |
| acdPaaUdpCfgTwoWayDelayThresh Number of consecutive delays greater than the threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.15 |
| acdPaaUdpCfgTwoWayAvgDelayThresh Two-way average delay threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.16 |
| acdPaaUdpCfgTwoWayDvMax Maximum allowed instantaneous delay variation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.17 |
| acdPaaUdpCfgTwoWayDvThresh Number of consecutive delay variations greater than the threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.18 |
| acdPaaUdpCfgTwoWayAvgDvThresh Two-way average delay variation threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.19 |
| acdPaaUdpCfgName This is a string to identify this PAA instance. | column | OctetString | .1.3.6.1.4.1.22420.2.5.3.1.2 |
| acdPaaUdpCfgIPv4DstAddr The destination IP address used to reach the peer PAA instance. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.22420.2.5.3.1.20 |
| acdPaaUdpCfgPortNumber The source UDP port number on which to listen for peer PAA samples. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.21 |
| acdPaaUdpCfgDscpValue The DSCP value used to reach the peer PAA instance. Its value ranges
from 0 to 64. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.22 |
| acdPaaUdpCfgVlan1PbitsValue The first VLAN priority used to tag the outgoing traffic.
Its value ranges from 0 to 7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.23 |
| acdPaaUdpCfgVlan2PbitsValue The second VLAN priority used to tag the outgoing traffic.
Its value ranges from 0 to 7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.24 |
| acdPaaUdpCfgOneWayDelayMax Maximum allowed instantaneous delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.25 |
| acdPaaUdpCfgOneWayDelayThresh Nbr consecutive delay > max before alert. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.26 |
| acdPaaUdpCfgOneWayAvgDelayThresh Two-way average delay threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.27 |
| acdPaaUdpCfgDestinationPortNumber The destination UDP port number used to reach the peer PAA instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.28 |
| acdPaaUdpCfgPeerID Unique value for the peer PAA instance. This value follows the ordering
of the status and the results table. Its value ranges from 1 to
MAXINT (4 bytes). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.29 |
| acdPaaUdpCfgState Configuration state of this PAA entry. | column | Enumeration | .1.3.6.1.4.1.22420.2.5.3.1.3 |
| acdPaaUdpCfgOperationMode PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.30 |
| acdPaaUdpCfgIgmpOneWayJoinPeriod The IGMP One-way join period is the amount of time to wait from the
beginning of the period before an IGMP join request is sent out. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.31 |
| acdPaaUdpCfgIgmpRefPeriod The IGMP reference period is the total amount of time in which we
sample IGMP join and leave requests. It must be a minimum of (10 * One-way ref. period). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.32 |
| acdPaaUdpCfgIgmpMaxJoinDly The maximum join delay objective. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.33 |
| acdPaaUdpCfgIgmpJoinDlyThres The maximum consecutive join delay samples allowed greater than the maximum join delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.34 |
| acdPaaUdpCfgIgmpJoinAvgDlyThres The maximum join average delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.35 |
| acdPaaUdpCfgIgmpMaxLvDly The maximum join delay objective. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.36 |
| acdPaaUdpCfgIgmpLvDlyThresh The maximum consecutive leave delay samples allowed greater than the maximum leave delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.37 |
| acdPaaUdpCfgIgmpLvAvgDlyThresh The maximum leave delay average. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.38 |
| acdPaaUdpCfgPktLossThreshExt Extended packet loss ratio threshold allowed without issuing an alarm
expressed in millionth of percent (1,000,000 is 1%). | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.39 |
| acdPaaUdpCfgPktSize Transmit packet size. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.4 |
| acdPaaUdpCfgVlan1PriorityValidation Indicates the status of VLAN 1 priority validation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.3.1.40 |
| acdPaaUdpCfgVlan1PriorityTxRxCoupling Indicates the status of VLAN 1 priority TX/RX coupling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.3.1.41 |
| acdPaaUdpCfgVlan1PriorityExpected The expected VLAN 1 priority value. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.42 |
| acdPaaUdpCfgDscpValidation Indicates the status of DSCP validation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.3.1.43 |
| acdPaaUdpCfgDscpTxRxCoupling Indicates the status of DSCP TX/RX coupling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.3.1.44 |
| acdPaaUdpCfgDscpExpected The expected VLAN 1 priority value. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.45 |
| acdPaaUdpCfgSamplingPeriod Interval in milliseconds at which PAA issues PAA measurement packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.5 |
| acdPaaUdpCfgCcLossThresh Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.6 |
| acdPaaUdpCfgPktLossRefPeriod Reference period in milliseconds for packet loss measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.7 |
| acdPaaUdpCfgOneWayRefPeriod Reference period in milliseconds for one-way measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.3.1.9 |