acdPaaL2CfgState
ACD-PAA-MIB ·
.1.3.6.1.4.1.22420.2.5.4.1.3
Object
column
r/w
Enumeration
Configuration state of this PAA entry.
Context
- MIB
- ACD-PAA-MIB
- OID
.1.3.6.1.4.1.22420.2.5.4.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- acdPaaL2CfgEntry
- Table
- acdPaaL2CfgTable
- Siblings
- 45
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | enable |
1 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acdPaaL2CfgID Unique value for each PAA instance. This value follows the ordering
of the status and the results table. Its value ranges from 1 to
MAXINT (4 bytes). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.1 |
| acdPaaL2CfgOneWayDvMax Maximum allowed instantaneous delay variation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.10 |
| acdPaaL2CfgOneWayDvThresh Number of consecutive delay variations greater than the threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.11 |
| acdPaaL2CfgOneWayAvgDvThresh One-way average delay variation threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.12 |
| acdPaaL2CfgTwoWayRefPeriod Reference period in milliseconds for two-way measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.13 |
| acdPaaL2CfgTwoWayDelayMax Maximum allowed instantaneous delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.14 |
| acdPaaL2CfgTwoWayDelayThresh Number of consecutive delays greater than the threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.15 |
| acdPaaL2CfgTwoWayAvgDelayThresh Two-way average delay threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.16 |
| acdPaaL2CfgTwoWayDvMax Maximum allowed instantaneous delay variation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.17 |
| acdPaaL2CfgTwoWayDvThresh Number of consecutive delay variations greater than the threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.18 |
| acdPaaL2CfgTwoWayAvgDvThresh Two-way average delay variation threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.19 |
| acdPaaL2CfgName This is a string to identify this PAA instance. | column | OctetString | .1.3.6.1.4.1.22420.2.5.4.1.2 |
| acdPaaL2CfgPortName The Port Name used to reach the peer PAA instance. | column | OctetString | .1.3.6.1.4.1.22420.2.5.4.1.20 |
| acdPaaL2CfgMacDst The MAC address used to reach the peer PAA instance. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.22420.2.5.4.1.21 |
| acdPaaL2CfgEtype The Ethernet type used for this PAA instance. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.22 |
| acdPaaL2CfgVlan1IdEn Enable or disable the first VLAN ID check | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.23 |
| acdPaaL2CfgVlan1Id The first VLAN ID used to compare the incoming PAA traffic.
Its value ranges from 0 to 4095. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.24 |
| acdPaaL2CfgVlan2IdEn Enable or disable the second VLAN ID check | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.25 |
| acdPaaL2CfgVlan2Id The second VLAN ID used to compare the incoming PAA traffic.
Its value ranges from 0 to 4095. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.26 |
| acdPaaL2CfgVlan1PbitsValue The first VLAN priority used to tag the outgoing traffic.
Its value ranges from 0 to 7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.27 |
| acdPaaL2CfgVlan2PbitsValue The second VLAN priority used to tag the outgoing traffic.
Its value ranges from 0 to 7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.28 |
| acdPaaL2CfgOneWayDelayMax Maximum allowed instantaneous delay. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.29 |
| acdPaaL2CfgOneWayDelayThresh Nbr consecutive delay > max before alert. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.30 |
| acdPaaL2CfgOneWayAvgDelayThresh One-way average delay threshold. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.31 |
| acdPaaL2CfgPeerID Unique value for the peer PAA instance. This value follows the ordering
of the status and the results table. Its value ranges from 1 to
MAXINT (4 bytes). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.32 |
| acdPaaL2CfgOperationMode PAA Operation Mode. Its values are: 1 = Bi-Dir, 2 = Source, 3 = Sink | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.33 |
| acdPaaL2CfgPktLossThreshExt Extended packet loss ratio threshold allowed without issuing an alarm
expressed in millionth of percent (1,000,000 is 1%). | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.34 |
| acdPaaL2CfgVlan1IdValidation Indicates the status of VLAN 1 ID validation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.35 |
| acdPaaL2CfgVlan1IdTxRxCoupling Indicates the status of VLAN 1 ID Tx/Rx coupling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.36 |
| acdPaaL2CfgVlan1IdExpected The expected VLAN 1 ID value. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.37 |
| acdPaaL2CfgVlan2IdValidation Indicates the status of VLAN 2 ID validation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.38 |
| acdPaaL2CfgVlan2IdTxRxCoupling Indicates the status of VLAN 2 ID Tx/Rx coupling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.39 |
| acdPaaL2CfgPktSize Transmit packet size. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.4 |
| acdPaaL2CfgVlan2IdExpected The expected VLAN 2 ID value. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.40 |
| acdPaaL2CfgVlan1PriorityValidation Indicates the status of VLAN 1 priority validation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.41 |
| acdPaaL2CfgVlan1PriorityTxRxCoupling Indicates the status of VLAN 1 priority Tx/Rx coupling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.42 |
| acdPaaL2CfgVlan1PriorityExpected The expected VLAN 1 priority value. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.43 |
| acdPaaL2CfgVlan2PriorityValidation Indicates the status of VLAN 2 priority validation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.44 |
| acdPaaL2CfgVlan2PriorityTxRxCoupling Indicates the status of VLAN 2 priority Tx/Rx coupling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.5.4.1.45 |
| acdPaaL2CfgVlan2PriorityExpected The expected VLAN 2 priority value. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.46 |
| acdPaaL2CfgSamplingPeriod Interval in milliseconds at which PAA issues PAA measurement packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.5 |
| acdPaaL2CfgCcLossThresh Maximum number of lost CCM (Connectivity Check Messages) for declaring a connectvity loss. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.6 |
| acdPaaL2CfgPktLossRefPeriod Reference period in milliseconds for packet loss measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.7 |
| acdPaaL2CfgPktLossThresh Allowed packet loss, in percentage (%). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.8 |
| acdPaaL2CfgOneWayRefPeriod Reference period in milliseconds for one-way measurement. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.5.4.1.9 |