acdCfmMepCfgIdx
ACD-CFM-MIB ·
.1.3.6.1.4.1.22420.2.7.1.3.5.1.1
Object
column
SNMPv2-SMIUnsigned32
Unique value for each MEP instance. This value follows the ordering the status table.
Context
- MIB
- ACD-CFM-MIB
- OID
.1.3.6.1.4.1.22420.2.7.1.3.5.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- acdCfmMepCfgEntry
- Table
- acdCfmMepCfgTable
- Siblings
- 20
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acdCfmMepCfgPrimaryVid Primary Vlan Id. | column | Q-BRIDGE-MIBVlanIdOrNone | .1.3.6.1.4.1.22420.2.7.1.3.5.1.10 |
| acdCfmMepCfgActive Administrative state of the MEP.
A Boolean indicating the administrative state of the MEP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.7.1.3.5.1.11 |
| acdCfmMepCfgCciEnable If set to true, the MEP will generate CCM messages. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.7.1.3.5.1.12 |
| acdCfmMepCfgCcmSeqEnable If set to true, the sequence number in the CCM PDU will increment. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.7.1.3.5.1.13 |
| acdCfmMepCfgPriority The priority value for CCMs and LTMs transmitted by the MEP. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.14 |
| acdCfmMepCfgAlarmPri The highest priority defect that has been present since the
MEPs Fault Notification Generator State Machine was last in
the FNG_RESET state. | column | AcdCfmMepLowestAlarmPri | .1.3.6.1.4.1.22420.2.7.1.3.5.1.15 |
| acdCfmMepCfgFngAlarmTime The time that defects must be present before a Fault Alarm is
issued (default 2500 milliseconds). | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.16 |
| acdCfmMepCfgFngResetTime The time that defects must be present before a Fault Alarm is
issued (default 10000 milliseconds). | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.17 |
| acdCfmMepCfgFpEnable If set to true, the faults generated by this MEP will be propagated to the Fault Propagation port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.7.1.3.5.1.18 |
| acdCfmMepCfgFpPortId The fault propagation port used to propagate faults. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.19 |
| acdCfmMepCfgRowStatus The writable columns in a row can not be changed if the row is active.
All columns must have a valid value before a row can be activated. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.22420.2.7.1.3.5.1.2 |
| acdCfmMepCfgCsfEnable If set to true, Client Signal Fail errors will be propagated to the Fault Propagation port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.7.1.3.5.1.20 |
| acdCfmMepCfgInterfaceStatusTLVEnable If set to true, Interface Status TLV will be included in Down MEP CCM PDU. Interface status is obtained from the Fault Propagation port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.7.1.3.5.1.21 |
| acdCfmMepCfgMdIdx Maintenance Domain instance index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.3 |
| acdCfmMepCfgMaIdx Maintenance Association instance index. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.4 |
| acdCfmMepCfgMepId Maintenance association End Point Identifier. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.5 |
| acdCfmMepCfgName Unique string for each Mep instance. The length includes the terminating NULL character. | column | OctetString | .1.3.6.1.4.1.22420.2.7.1.3.5.1.6 |
| acdCfmMepCfgPortId The Port Identifier. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.7.1.3.5.1.7 |
| acdCfmMepCfgPortIdMacAddr MAC Address of the port. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.22420.2.7.1.3.5.1.8 |
| acdCfmMepCfgDirection Direction in which the Maintenance association (MEP) faces on the bridge port. | column | AcdCfmMepDirection | .1.3.6.1.4.1.22420.2.7.1.3.5.1.9 |