acdCfmMepCfgDirection

ACD-CFM-MIB · .1.3.6.1.4.1.22420.2.7.1.3.5.1.9
MIB view Table view

Object

column r/w AcdCfmMepDirection 
Direction in which the Maintenance association (MEP) faces on the bridge port.

Context

MIB
ACD-CFM-MIB
OID
.1.3.6.1.4.1.22420.2.7.1.3.5.1.9
Type
column
Access
readwrite
Status
current
Parent
acdCfmMepCfgEntry
Table
acdCfmMepCfgTable
Siblings
20

Syntax

AcdCfmMepDirection
Source
AcdCfmMepDirection
Base type
Enumeration

Values & Constraints

Type Values
1down
2up

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
acdCfmMepCfgIdx
Unique value for each MEP instance. This value follows the ordering the status table.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.1
acdCfmMepCfgPrimaryVid
Primary Vlan Id.
columnQ-BRIDGE-MIBVlanIdOrNone.1.3.6.1.4.1.22420.2.7.1.3.5.1.10
acdCfmMepCfgActive
Administrative state of the MEP. A Boolean indicating the administrative state of the MEP.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.7.1.3.5.1.11
acdCfmMepCfgCciEnable
If set to true, the MEP will generate CCM messages.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.7.1.3.5.1.12
acdCfmMepCfgCcmSeqEnable
If set to true, the sequence number in the CCM PDU will increment.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.7.1.3.5.1.13
acdCfmMepCfgPriority
The priority value for CCMs and LTMs transmitted by the MEP.
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.14
acdCfmMepCfgAlarmPri
The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state.
columnAcdCfmMepLowestAlarmPri.1.3.6.1.4.1.22420.2.7.1.3.5.1.15
acdCfmMepCfgFngAlarmTime
The time that defects must be present before a Fault Alarm is issued (default 2500 milliseconds).
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.16
acdCfmMepCfgFngResetTime
The time that defects must be present before a Fault Alarm is issued (default 10000 milliseconds).
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.17
acdCfmMepCfgFpEnable
If set to true, the faults generated by this MEP will be propagated to the Fault Propagation port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.7.1.3.5.1.18
acdCfmMepCfgFpPortId
The fault propagation port used to propagate faults.
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.19
acdCfmMepCfgRowStatus
The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.22420.2.7.1.3.5.1.2
acdCfmMepCfgCsfEnable
If set to true, Client Signal Fail errors will be propagated to the Fault Propagation port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.7.1.3.5.1.20
acdCfmMepCfgInterfaceStatusTLVEnable
If set to true, Interface Status TLV will be included in Down MEP CCM PDU. Interface status is obtained from the Fault Propagation port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.7.1.3.5.1.21
acdCfmMepCfgMdIdx
Maintenance Domain instance index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.3
acdCfmMepCfgMaIdx
Maintenance Association instance index.
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.4
acdCfmMepCfgMepId
Maintenance association End Point Identifier.
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.5
acdCfmMepCfgName
Unique string for each Mep instance. The length includes the terminating NULL character.
columnOctetString.1.3.6.1.4.1.22420.2.7.1.3.5.1.6
acdCfmMepCfgPortId
The Port Identifier.
columnUnsigned32.1.3.6.1.4.1.22420.2.7.1.3.5.1.7
acdCfmMepCfgPortIdMacAddr
MAC Address of the port.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.22420.2.7.1.3.5.1.8