a3IPextFlushCtl
A3Com-IPextns-r5-MIB ·
.1.3.6.1.4.1.43.2.6.2
Object
scalar
mandatory
r/w
Enumeration
When set to 2, this object can be used to remove all dynamically learned entries from the IP routing table. When set to 3, this object can be used to remove dynamically learned entries from the Address Resolution Table.
Context
- MIB
- A3Com-IPextns-r5-MIB
- OID
.1.3.6.1.4.1.43.2.6.2- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- a3ComIPextns
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | flushRoutes |
3 | flushARP |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3IPextMode mandatory This object determines the mode the IP protocol layer
operates in. When in multipleNet mode, the system will
accept different network addresses for each of its
interfaces. Routi… | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.1 |
| a3IParpOverBlocked mandatory When the system is in singleNet mode (ie, it is
in a bridge state), this parameter controls whether
or not ARP request and replies are allowed to be
sent or received over a non-fo… | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.10 |
| a3IPrarpClientCtl mandatory This allows the RARP client function to be
enabled or disabled. If enabled, this system
will send RARP requests. If disabled, the system
will not send RARP requests.
… | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.11 |
| a3IPrarpServerCtl mandatory This allows the RARP server function to be
enabled or disabled. If enabled, this system
will respond to RARP requests. If disabled,
this system will not respond.
This… | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.12 |
| a3IParpConfigTable mandatory This table contains ARP configuration information. | table | - | .1.3.6.1.4.1.43.2.6.13 |
| a3IPsmdsGaTable mandatory This table contains a set of IP network address
to SMDS Group Address pairings. | table | - | .1.3.6.1.4.1.43.2.6.14 |
| a3IPx25configTable mandatory This table contains a set of X25 configuration
parameters relating to routing IP over x25 networks. | table | - | .1.3.6.1.4.1.43.2.6.15 |
| a3IPqueuePriority mandatory This object, which is used by the Multiple Priority Queue
feature, specifies into which queue IP packets are placed.
If this object has the value default(4), then IP packets are
p… | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.16 |
| a3IPfwdSubnetBcast mandatory | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.17 |
| a3IPicmpGenTable mandatory This table contains ICMP configuration information. | table | - | .1.3.6.1.4.1.43.2.6.18 |
| a3IPextRelaySrcRteCtl mandatory This object is used to control the relaying of packets
that contain the Loose or Strict source route option.
If this object is set to relay (1), those packets are
relayed. If thi… | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.3 |
| a3IPextSplitLoadCtl mandatory This object is used to control load splitting. If
split (1), is specified, the traffic load is distributed
among a set of least-equal-cost paths. These paths
are selected on a … | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.4 |
| a3IPicmpInfoCtl mandatory This object determines whether this system replies to
ICMP Information request packets. If this object is
set to info (1), replies are sent. Otherwise, no replies
are sent. | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.5 |
| a3IPicmpMaskCtl mandatory This object determines whether this system replies
to ICMP Address Mask request packets. If this object
is set to mask (1), replies are sent. Otherwise, no
replies are sent. | scalar | Enumeration | .1.3.6.1.4.1.43.2.6.6 |
| a3IPntmExtTable mandatory This table is an extension of the ipNetToMediaTable
from mibII. Currently, this table contains objects
for controlling MAC header formats and for controlling
proxy ARP for each e… | table | - | .1.3.6.1.4.1.43.2.6.7 |
| a3IPaddrConfigTable mandatory This table contains the IP addresses assigned to each
IP port. | table | - | .1.3.6.1.4.1.43.2.6.8 |
| a3IPforwardExtTable mandatory An extension to the ipForwardTable. | table | - | .1.3.6.1.4.1.43.2.6.9 |