a3IPaddrConfigTable

A3Com-IPextns-r5-MIB · .1.3.6.1.4.1.43.2.6.8

MIB view Table view

Object

table mandatory

This table contains the IP addresses assigned to each
IP port.

Context

MIB: A3Com-IPextns-r5-MIB
OID: .1.3.6.1.4.1.43.2.6.8
Type: table
Status: mandatory
Parent: a3ComIPextns
Siblings: 17
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a3IPextMode mandatory This object determines the mode the IP protocol layer operates in. When in multipleNet mode, the system will accept different network addresses for each of its interfaces. Routi…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.1`
a3IParpOverBlocked mandatory When the system is in singleNet mode (ie, it is in a bridge state), this parameter controls whether or not ARP request and replies are allowed to be sent or received over a non-fo…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.10`
a3IPrarpClientCtl mandatory This allows the RARP client function to be enabled or disabled. If enabled, this system will send RARP requests. If disabled, the system will not send RARP requests. …	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.11`
a3IPrarpServerCtl mandatory This allows the RARP server function to be enabled or disabled. If enabled, this system will respond to RARP requests. If disabled, this system will not respond. This…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.12`
a3IParpConfigTable mandatory This table contains ARP configuration information.	table	-	`.1.3.6.1.4.1.43.2.6.13`
a3IPsmdsGaTable mandatory This table contains a set of IP network address to SMDS Group Address pairings.	table	-	`.1.3.6.1.4.1.43.2.6.14`
a3IPx25configTable mandatory This table contains a set of X25 configuration parameters relating to routing IP over x25 networks.	table	-	`.1.3.6.1.4.1.43.2.6.15`
a3IPqueuePriority mandatory This object, which is used by the Multiple Priority Queue feature, specifies into which queue IP packets are placed. If this object has the value default(4), then IP packets are p…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.16`
a3IPfwdSubnetBcast mandatory	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.17`
a3IPicmpGenTable mandatory This table contains ICMP configuration information.	table	-	`.1.3.6.1.4.1.43.2.6.18`
a3IPextFlushCtl mandatory When set to 2, this object can be used to remove all dynamically learned entries from the IP routing table. When set to 3, this object can be used to remove dynamically learne…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.2`
a3IPextRelaySrcRteCtl mandatory This object is used to control the relaying of packets that contain the Loose or Strict source route option. If this object is set to relay (1), those packets are relayed. If thi…	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.3`
a3IPextSplitLoadCtl mandatory This object is used to control load splitting. If split (1), is specified, the traffic load is distributed among a set of least-equal-cost paths. These paths are selected on a …	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.4`
a3IPicmpInfoCtl mandatory This object determines whether this system replies to ICMP Information request packets. If this object is set to info (1), replies are sent. Otherwise, no replies are sent.	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.5`
a3IPicmpMaskCtl mandatory This object determines whether this system replies to ICMP Address Mask request packets. If this object is set to mask (1), replies are sent. Otherwise, no replies are sent.	scalar	Enumeration	`.1.3.6.1.4.1.43.2.6.6`
a3IPntmExtTable mandatory This table is an extension of the ipNetToMediaTable from mibII. Currently, this table contains objects for controlling MAC header formats and for controlling proxy ARP for each e…	table	-	`.1.3.6.1.4.1.43.2.6.7`
a3IPforwardExtTable mandatory An extension to the ipForwardTable.	table	-	`.1.3.6.1.4.1.43.2.6.9`

Child Objects