a3IPsecureMinLevel
A3Com-IPSO-r1-MIB ·
.1.3.6.1.4.1.43.2.12.3.1.7
Object
column
mandatory
r/w
Enumeration
This defines the minimum classification level which
is acceptable by this port. This applies to any packet
which is entering or leaving this port. If the
classification level is outside the range defined by
the value of this object and the value of a3IPsecureMaxLevel,
the packet is discarded.
If a3IPsecureMaxLevel is set to level less than the level
indicated by this object, the value of this object will
be shifted so it is equal to a3IPsecureMaxLevel. This
will ensure that the range of security levels identified
by these two objects makes sense.
Context
- MIB
- A3Com-IPSO-r1-MIB
- OID
.1.3.6.1.4.1.43.2.12.3.1.7- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- a3IPsecureParamEntry
- Table
- a3IPsecureParamTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | topSecret |
2 | secret |
3 | confidential |
4 | unclassified |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3IPsecureParamPortIndex mandatory This identifies the IP port to which the security
parameters in this entry apply. | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.1 |
| a3IPsecureParamCtl mandatory This object controls a number of parameters associated
with IP security. Each parameter is represented by
a specific bit. If the bit is set, the parameter is
turned on. If the … | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.2 |
| a3IPsecureLabelDefaultLevel mandatory This parameter applies to packets received over this port
that have no classification level or authority flags.
When such packets are received, the value of this parameter
dete… | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.3 |
| a3IPsecureLabelDefaultAuth mandatory Like a3IPsecureLabelDefaultLevel, this parameter applies
only to packets received over this port that have no
classification level or authority flags. When such
packets are rece… | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.4 |
| a3IPsecureLabelSysLevel mandatory This parameter applies to packets originated by this system
and sent over this port. When such packets are sent, the
value of this parameter determines the IP security level tha… | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.5 |
| a3IPsecureLabelSysAuth mandatory Like a3IPsecureLabelSysLevel, this parameter applies
only to packets originated by this system and sent over
this port. When such packets are sent, the value of this
parameter … | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.6 |
| a3IPsecureMaxLevel mandatory This define the maximum classification level which
is acceptable by this port. This applies to any packet
which is entering or leaving this port. If the
classification level is … | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.8 |