a3IPsecureLabelSysAuth
A3Com-IPSO-r1-MIB ·
.1.3.6.1.4.1.43.2.12.3.1.6
Object
column
mandatory
r/w
Integer32
Like a3IPsecureLabelSysLevel, this parameter applies
only to packets originated by this system and sent over
this port. When such packets are sent, the value of this
parameter determines the Protection Authority flag field
that is attached to the packet before any processing is
done. Note, this is assuming a3IPsecureLabelSysLevel has
a value other than none (1).
The individual Protection Authority flags that are included
are determined by the individual bits that are set
in the value of this object, with the two least significant
bytes being of interest. Starting from bit 7 of the
INTEGER (with the least significant bit being numbered 0),
the mapping of bits to Protection Authority flags is as
follows (note: rfc1108 labels the most significant bit '0',
the next most significant bit '1', etc),
bit# Prot. Auth. Flag
7 GENSER
6 SIOP
5 SCI
4 NSA
3 DOE
While only bits 7 through 3 have specific Protection Authority
flags assigned to them, any 2 byte combination of bits may be
set as long as that combination is allowed by rfc1108. The
same 1 or 2 byte pattern of bits identified by the value of this
object will be placed in the Protection Authority field of
received packets with no IP security options present. (note:
this is conditioned on a3IPsecureLabelDefaultLevel for this
port having a value other than none (1).)
If this object has the value 0, then no Protection Authority
field will be added to any received packets, regardless of the
value of a3IPsecureLabelDefaultLevel.
Context
- MIB
- A3Com-IPSO-r1-MIB
- OID
.1.3.6.1.4.1.43.2.12.3.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- a3IPsecureParamEntry
- Table
- a3IPsecureParamTable
- Siblings
- 7
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3IPsecureParamPortIndex mandatory This identifies the IP port to which the security
parameters in this entry apply. | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.1 |
| a3IPsecureParamCtl mandatory This object controls a number of parameters associated
with IP security. Each parameter is represented by
a specific bit. If the bit is set, the parameter is
turned on. If the … | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.2 |
| a3IPsecureLabelDefaultLevel mandatory This parameter applies to packets received over this port
that have no classification level or authority flags.
When such packets are received, the value of this parameter
dete… | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.3 |
| a3IPsecureLabelDefaultAuth mandatory Like a3IPsecureLabelDefaultLevel, this parameter applies
only to packets received over this port that have no
classification level or authority flags. When such
packets are rece… | column | Integer32 | .1.3.6.1.4.1.43.2.12.3.1.4 |
| a3IPsecureLabelSysLevel mandatory This parameter applies to packets originated by this system
and sent over this port. When such packets are sent, the
value of this parameter determines the IP security level tha… | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.5 |
| a3IPsecureMinLevel mandatory This defines the minimum classification level which
is acceptable by this port. This applies to any packet
which is entering or leaving this port. If the
classification level is… | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.7 |
| a3IPsecureMaxLevel mandatory This define the maximum classification level which
is acceptable by this port. This applies to any packet
which is entering or leaving this port. If the
classification level is … | column | Enumeration | .1.3.6.1.4.1.43.2.12.3.1.8 |