a3IPsecureAuthInFlags

This identifies one combination of Protection Authority
flags that is allowed to be present in any packet 
received by this port.  
              
The combination of Protection Authority flags that is 
allowed is determined by the individual bits that are set
in the value of this object, with the two least significant
bytes being of interest.  Starting from bit 7 of the
INTEGER (with the least significant bit being numbered 0), 
the mapping of bits to Protection Authority flags is as 
follows (note: rfc1108 labels the most significant bit '0', 
the next most significant bit '1', etc),
              
   bit#                Prot. Auth. Flag
    7                  GENSER
    6                  SIOP
    5                  SCI
    4                  NSA
    3                  DOE
              
While only bits 7 through 3 have specific Protection Authority
flags assigned to them, any 2 byte combination of bits may be 
set as long as that combination is allowed by rfc1108.  The 
same 1 or 2 byte pattern of bits identified by the value of this 
object must be present in any received IP packet.
              
If the value of this object is zero, packets with no
Protection Authority flags are accepted by this port.

MIB

A3Com-IPSO-r1-MIB

OID

.1.3.6.1.4.1.43.2.12.4.1.2

Type

column

Access

readonly

Status

mandatory

Parent

a3IPsecureAuthInEntry

Table

a3IPsecureAuthInTable

Siblings

3