dlswCircuitS2TDomain
A3Com-DLSW-r1-MIB ·
.1.3.6.1.4.1.43.2.24.5.2.1.11
Object
column
mandatory
ObjectIdentifier
If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0.0.
Context
- MIB
- A3Com-DLSW-r1-MIB
- OID
.1.3.6.1.4.1.43.2.24.5.2.1.11- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- dlswCircuitEntry
- Table
- dlswCircuitTable
- Siblings
- 30
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dlswCircuitS1Mac mandatory The MAC Address of End Station 1 (S1) used for this circuit. | column | MacAddress | .1.3.6.1.4.1.43.2.24.5.2.1.1 |
| dlswCircuitS2Location mandatory The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the… | column | EndStationLocation | .1.3.6.1.4.1.43.2.24.5.2.1.10 |
| dlswCircuitS2TAddress mandatory If the location of End Station 2 is remote,
this object contains the address of the partner
DLSw, else it will be an OCTET STRING of zero length. | column | TAddress | .1.3.6.1.4.1.43.2.24.5.2.1.12 |
| dlswCircuitS2CircuitId mandatory The Circuit ID assigned to this circuit by the partner
DLSw node. The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw … | column | OctetString | .1.3.6.1.4.1.43.2.24.5.2.1.13 |
| dlswCircuitOrigin mandatory This object specifies which of the two end stations
initiated the establishment of this circuit. | column | Enumeration | .1.3.6.1.4.1.43.2.24.5.2.1.14 |
| dlswCircuitEntryTime mandatory The value of dlswUpTime when this circuit table
conceptual row was created. | column | DlswTimeStamp | .1.3.6.1.4.1.43.2.24.5.2.1.15 |
| dlswCircuitStateTime mandatory The value of dlswUpTime when this circuit entered the
current state. | column | DlswTimeStamp | .1.3.6.1.4.1.43.2.24.5.2.1.16 |
| dlswCircuitState mandatory The current state of this circuit. The implementation
may choose to keep entries for some period of time after
circuit disconnect, so the network management station can
gather th… | column | Enumeration | .1.3.6.1.4.1.43.2.24.5.2.1.17 |
| dlswCircuitPriority mandatory The transmission priority of this circuit as understood by
this DLSw node. This value is determined by the two DLSw
nodes at circuit startup time. If this DLSw node does not
sup… | column | Enumeration | .1.3.6.1.4.1.43.2.24.5.2.1.18 |
| dlswCircuitFCSendGrantedUnits mandatory The number of paced SSP messages that this DLSw is currently
authorized to send on this circuit before it must stop and
wait for an additional flow control indication from the
par… | column | Integer32 | .1.3.6.1.4.1.43.2.24.5.2.1.19 |
| dlswCircuitS1Sap mandatory The SAP at End Station 1 (S1) used for this circuit. | column | OctetString | .1.3.6.1.4.1.43.2.24.5.2.1.2 |
| dlswCircuitFCSendCurrentWndw mandatory The current window size that this DLSw is using in its role
as a data sender. This is the value by which this DLSw would
increase the number of messages it is authorized to send,… | column | Integer32 | .1.3.6.1.4.1.43.2.24.5.2.1.20 |
| dlswCircuitFCRecvGrantedUnits mandatory The current number of paced SSP messages that this DLSw has
authorized the partner DLSw to send on this circuit before
the partner DLSw must stop and wait for an additional flow
c… | column | Integer32 | .1.3.6.1.4.1.43.2.24.5.2.1.21 |
| dlswCircuitFCRecvCurrentWndw mandatory The current window size that this DLSw is using in its role
as a data receiver. This is the number of additional paced
SSP messages that this DLSw would be authorizing its DLSw
p… | column | Integer32 | .1.3.6.1.4.1.43.2.24.5.2.1.22 |
| dlswCircuitFCLargestRecvGranted mandatory The largest receive window size granted by this DLSw during
the current activation of this circuit. This is not the
largest number of messages granted at any time, but the
larges… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.43.2.24.5.2.1.23 |
| dlswCircuitFCLargestSendGranted mandatory The largest send (with respect to this DLSw) window size
granted by the partner DLSw during the current activation of
this circuit.
The value zero should be returne… | column | RFC1155-SMIGauge | .1.3.6.1.4.1.43.2.24.5.2.1.24 |
| dlswCircuitFCHalveWndwSents mandatory The number of Halve Window operations this DLSw has sent on
this circuit, in its role as a data receiver.
The value zero should be returned if this circuit is not
r… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.2.24.5.2.1.25 |
| dlswCircuitFCResetOpSents mandatory The number of Reset Window operations this DLSw has sent on
this circuit, in its role as a data receiver.
The value zero should be returned if this circuit is not
r… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.2.24.5.2.1.26 |
| dlswCircuitFCHalveWndwRcvds mandatory The number of Halve Window operations this DLSw has received on
this circuit, in its role as a data sender.
The value zero should be returned if this circuit is not… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.2.24.5.2.1.27 |
| dlswCircuitFCResetOpRcvds mandatory The number of Reset Window operations this DLSw has received on
this circuit, in its role as a data sender.
The value zero should be returned if this circuit is not… | column | RFC1155-SMICounter | .1.3.6.1.4.1.43.2.24.5.2.1.28 |
| dlswCircuitDiscReasonLocal mandatory The reason why this circuit was last disconnected, as seen
by this DLSw node.
This object is present only if the implementation keeps circuit
table entries around f… | column | Enumeration | .1.3.6.1.4.1.43.2.24.5.2.1.29 |
| dlswCircuitS1IfIndex mandatory The IfEntry index of the local interface through which S1
can be reached. | column | Integer32 | .1.3.6.1.4.1.43.2.24.5.2.1.3 |
| dlswCircuitDiscReasonRemote mandatory The generic reason code why this circuit was last disconnected,
as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK.
If the partner does not send a reason code in these … | column | Enumeration | .1.3.6.1.4.1.43.2.24.5.2.1.30 |
| dlswCircuitDiscReasonRemoteData mandatory Implementation-specific data reported by the DLSw partner in a
HALT_DL or HALT_DL_NOACK, to help specify how and why this
circuit was last disconnected. If the partner does not s… | column | OctetString | .1.3.6.1.4.1.43.2.24.5.2.1.31 |
| dlswCircuitS1DlcType mandatory The DLC protocol in use between the DLSw node and S1. | column | DlcType | .1.3.6.1.4.1.43.2.24.5.2.1.4 |
| dlswCircuitS1RouteInfo mandatory If source-route bridging is in use between the DLSw
node and S1, this is the routing information field
describing the path between the two devices.
Otherwise the value will be an … | column | OctetString | .1.3.6.1.4.1.43.2.24.5.2.1.5 |
| dlswCircuitS1CircuitId mandatory The Circuit ID assigned by this DLSw node to this circuit.
The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was … | column | OctetString | .1.3.6.1.4.1.43.2.24.5.2.1.6 |
| dlswCircuitS1Dlc mandatory Points to a conceptual row of the underlying DLC MIB,
which could either be the standard SDLC or LLC MIBs, or an
enterprise-specific DLC MIB. | column | Instancepointer | .1.3.6.1.4.1.43.2.24.5.2.1.7 |
| dlswCircuitS2Mac mandatory The MAC Address of End Station 2 (S2) used for this circuit. | column | MacAddress | .1.3.6.1.4.1.43.2.24.5.2.1.8 |
| dlswCircuitS2Sap mandatory The SAP at End Station 2 (S2) used for this circuit. | column | OctetString | .1.3.6.1.4.1.43.2.24.5.2.1.9 |