resPairEnable
A3COM0304-RESILIENTLINKS ·
.1.3.6.1.4.1.43.10.15.1.1.11
Object
column
mandatory
r/w
Enumeration
This parameter controls whether the resilient pair is enabled or not. In the disable(2) state , both ports of the resilient pair are disabled. The default value of this parameter is enable(1).
Context
- MIB
- A3COM0304-RESILIENTLINKS
- OID
.1.3.6.1.4.1.43.10.15.1.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- resTableEntry
- Table
- resTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| resRepeater mandatory A resilient pair must be attached to one of the repeaters in
the chassis. This is part of the index value required to access this table. | column | Integer32 | .1.3.6.1.4.1.43.10.15.1.1.1 |
| resPairAction mandatory This is object allows the state of a resilient pair to be
modified. The create(1) operation configures the resilient port from this table
entry. The delete(2) operation removes … | column | Enumeration | .1.3.6.1.4.1.43.10.15.1.1.10 |
| resPairMode mandatory This parameter controls the rules that determine the
operation of the resilient pair. The value no-switch-back(1) means that
both ports are treated equally. The value switch-back-… | column | Enumeration | .1.3.6.1.4.1.43.10.15.1.1.12 |
| resPairName mandatory The textual name of the interface. The value of this
object should be the name of the interface as assigned
by the local device and should be suitable for use in
commands entered… | column | OctetString | .1.3.6.1.4.1.43.10.15.1.1.13 |
| resMainSlot mandatory This is the second key in the index to this table. This is
the slot number of the main port in this pair. | column | Integer32 | .1.3.6.1.4.1.43.10.15.1.1.2 |
| resMainPort mandatory This is the final, key used to index entries in this table.
It is the port number of the main port in the pair. | column | Integer32 | .1.3.6.1.4.1.43.10.15.1.1.3 |
| resMainState mandatory Each port in a pair is constantly monitored for signs of
failure. Failure information is used to automatically change the active port
from main to standby or vice-versa. Each po… | column | Enumeration | .1.3.6.1.4.1.43.10.15.1.1.4 |
| resStandbySlot mandatory This is the slot number of the standby port for this pair. | column | Integer32 | .1.3.6.1.4.1.43.10.15.1.1.5 |
| resStandbyPort mandatory This is the port number of the standby port. | column | Integer32 | .1.3.6.1.4.1.43.10.15.1.1.6 |
| resStandbyState mandatory Each port in a pair is constantly monitored for signs of
failure. Failure information is used to automatically change the active port
from main to standby or vice-versa. Each po… | column | Enumeration | .1.3.6.1.4.1.43.10.15.1.1.7 |
| resPairState mandatory Each row in the table is in one of two states, invalid(1) or
operational(2). If the state is invalid(1), the resilient pair represented by
this row is not active. There are seve… | column | Enumeration | .1.3.6.1.4.1.43.10.15.1.1.8 |
| resPairModificationStatus mandatory This parameter must be set to under-modification(1) before any
changes are made to an existing configuration. Changes are not applied until
this parameter is set to stable. | column | Enumeration | .1.3.6.1.4.1.43.10.15.1.1.9 |