a3ComRoutePolicyWeight
A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB ·
.1.3.6.1.4.1.43.29.4.23.1.1.11
Object
column
mandatory
r/w
Integer32
This object assigns an administrative weight to the policy entry. A policy with a higher value takes precedence over a policy with a lower value. Usage of a3ComRoutePolicyWeight applies when an order of precedence is desired within multiple policies that match a common route. This object can be modified at any time.
Context
- MIB
- A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB
- OID
.1.3.6.1.4.1.43.29.4.23.1.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- a3ComRoutePolicyEntry
- Table
- a3ComRoutePolicyTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ComRoutePolicyIndex mandatory Unique identifier of a row in the policy table. The actual number
of rows that can be created on any particular device depends on
the memory and processing resources available a… | column | Integer32 | .1.3.6.1.4.1.43.29.4.23.1.1.1 |
| a3ComRoutePolicyMetric mandatory This object is the value by which an additional adjustment
can be performed on a matched route metric. The actual
operation performed is defined by a3ComRoutePolicyAdjustMetric… | column | Integer32 | .1.3.6.1.4.1.43.29.4.23.1.1.10 |
| a3ComRoutePolicyExportType mandatory This object describes which type of route advertisement
the router will use when a given protocol can export routes in
multiple ways.
In situations when there i… | column | Enumeration | .1.3.6.1.4.1.43.29.4.23.1.1.12 |
| a3ComRoutePolicyRowStatus mandatory The status column for a routing policy. This object can be set to:
active(1),
createAndGo(4),
createAndWait(5),
destroy(6)
The following values may be read:
… | column | RowStatus | .1.3.6.1.4.1.43.29.4.23.1.1.13 |
| a3ComRoutePolicyProtocolType mandatory This mandatory object defines the protocol in which a policy will
be used. Once such protocol family is defined, the agent will use
this information to parse the source, route, … | column | Enumeration | .1.3.6.1.4.1.43.29.4.23.1.1.2 |
| a3ComRoutePolicyType mandatory This object specifies what type of policy this is. The type
import regards to ingress -- where a route advertised
externally is learned by the device managed. And the type
expo… | column | Enumeration | .1.3.6.1.4.1.43.29.4.23.1.1.3 |
| a3ComRoutePolicyOriginProtocol mandatory This object is only used when a3ComRoutePolicyType is set to
export(2). It makes up a mask of protocols, within the protocol
suite, that matches the policy entry. If set to zer… | column | Integer32 | .1.3.6.1.4.1.43.29.4.23.1.1.4 |
| a3ComRoutePolicySourceAddress mandatory This DisplayString is the network address of the gateway
to the route address. Note that when the policy
is of the type import(1), this object will correspond to
a neighboring … | column | OctetString | .1.3.6.1.4.1.43.29.4.23.1.1.5 |
| a3ComRoutePolicyRouteAddress mandatory This DisplayString is the network address of the route to
which this policy applies. Such address will be known when a route
advertisement is received by the device being manag… | column | OctetString | .1.3.6.1.4.1.43.29.4.23.1.1.6 |
| a3ComRoutePolicyRouteMask mandatory This DisplayString is the network mask of the route to
which this policy applies. The following formats can be used:
IP cccc - ipAddress MIB
IP n… | column | OctetString | .1.3.6.1.4.1.43.29.4.23.1.1.7 |
| a3ComRoutePolicyAction mandatory This object specifies whether the protocol rejects a route that
matches the policy or accepts it. a3ComRoutePolicyAction can be
modified at any time. | column | Enumeration | .1.3.6.1.4.1.43.29.4.23.1.1.8 |
| a3ComRoutePolicyAdjustMetric mandatory This object defines what type of operation that can be
additionally performed at a route metric. Note that
this object will be always ignored if a3ComRoutePolicyAction is of
t… | column | Enumeration | .1.3.6.1.4.1.43.29.4.23.1.1.9 |