h3cPosaAppIfIndex

A3COM-HUAWEI-POSA-MIB · .1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.3
MIB view Table view

Object

column r/w SNMPv2-SMIInteger32 
This attribute is the ifindex through which the router connecting with
the application server, if the service type of POS application is flow(2).
It is invalid if the service type is tcp(1).
At preasent, it supports 5 types of interface: FCM, SERIAL, ASYNC,
AM (Analog Modem) and AUX.

Context

MIB
A3COM-HUAWEI-POSA-MIB
OID
.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.3
Type
column
Access
readwrite
Status
current
Parent
h3cPosaAppEntry
Table
h3cPosaAppTable
Siblings
21

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cPosaAppID
The identification of a POS application. It ranges from 1 to 31.
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.1
h3cPosaAppKeepAliveInterval
The TCP keep alive interval of the connection between the router and the application server. In unit of seconds. The default value is 2 seconds. It is valid only when the service…
columnseconds Integer32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.10
h3cPosaAppKeepAliveCount
The maximum number of sending TCP keep alive packets. It is valid only when the service type is tcp(1).
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.11
h3cPosaAppConnectTimeout
The maximum interval that the router waits for the reply from application server after sending the request for establishing a TCP connection. It is invalid if the service type is…
columnseconds Integer32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.12
h3cPosaAppState
The current running state of application server.
columnH3cPeerState.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.13
h3cPosaAppRowStatus
Operation status.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.14
h3cPosaAppName
The description of a POS application.
columnOctetString.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.15
h3cPosaCallerIDTransEnable
Enable or disable the caller-id transmission function.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.16
h3cPosaTpduChangeStrategy
Set the strategy to modify the address of the packet from terminals before delivering it to application server.
columnH3cTpduChangeStrategy.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.17
h3cPosaBackupAppID
Specify the backup application ID, 0 indicates not using backup application. It is invalid if the service type is flow(2).
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.18
h3cPosaQuietTimeOut
Specify the wait time for re-activating application server. It is invalid if the service type is flow(2).
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.19
h3cPosaAppServiceType
The service type of a POS application. It means the way in which the router connects with the application server.
columnH3cAppServiceType.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.2
h3cPosaAppHello
Specify the switch of hello packet for the application server.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.20
h3cPosaAppHelloInterval
Specify the interval time in minute(s) of hello packet.
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.21
h3cPosaAppRouterPort
The source port of access router used in connecting with application server. 0 indicates not to specify the source port. It is valid only if the service type is tcp(1) and mode i…
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.22
h3cPosaAppMode
The work mode of a POS application.
columnH3cAppMode.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.4
h3cPosaAppHostIPType
The IP address type of the application server. And now it must be IPV4. It is invalid if the service type is flow(2).
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.5
h3cPosaAppHostIP
The IP address of the application server. And now it only supports IPV4. It is invalid if the service type is flow(2).
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.6
h3cPosaAppHostPort
The listening port of the application server. If the information of the application server is not specified, this object will return the value 0. It is invalid if the service typ…
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.7
h3cPosaAppRouterIPType
The source IP address type of the access router. Now it must be ipv4. It is invalid if the service type is flow(2).
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.8
h3cPosaAppRouterIP
The source IP address of access router used in connecting with application server. Now it only supports ipv4. It is invalid if the service type is flow(2).
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.43.45.1.10.2.92.2.1.1.9