hwNqaStatResMaxRtt
A3COM-HUAWEI-NQA-MIB ·
.1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.5
Object
The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received.
Context
- MIB
- A3COM-HUAWEI-NQA-MIB
- OID
.1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.5- Type
- column
- Access
- readonly
- Status
- current
- Units
- milliseconds
- Parent
- hwNqaStatisticsResultsEntry
- Table
- hwNqaStatisticsResultsTable
- Siblings
- 30
Syntax
milliseconds SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwNqaStatResIndex An entry in this table is created when the statistics
result of a NQA probe is determined.
An implementation MUST start assigning
hwNqaStatResIndex values at 1 and … | column | Unsigned32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.1 |
| hwNqaStatResStartTime This object contains the start time of the statistic. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.10 |
| hwNqaStatResInterval This object contains the interval between two times of statistic. | column | seconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.11 |
| hwNqaStatResRttNumDisconnects The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.12 |
| hwNqaStatResRttTimeouts The number of times that a probe failed because the probe timed out. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.13 |
| hwNqaStatResRttBusies The number of times that a NQA probe failed because
errors related to sockets. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.14 |
| hwNqaStatResRttNoConnections The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.15 |
| hwNqaStatResRttDrops The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.16 |
| hwNqaStatResRttSequenceErrors The number of packets arrived out of sequence. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.17 |
| hwNqaStatResRttErrors The number of other errors. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.18 |
| hwNqaStatResLostPacketRatio The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent pa… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.19 |
| hwNqaStatResIpTargetAddressType This object indicates the type of address stored
in the corresponding hwNqaStatResIpTargetAddress
object. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.2 |
| hwNqaStatResPacketLateArrival The value of this object reflects the number of the packets that
arrived after the timeout. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.20 |
| hwNqaStatResRttSum This object contains the sum of the squares for all NQA
responses received during the test lifetime. The value of this object
MUST be reported as 0 when no NQA responses have been… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.21 |
| hwNqaStatResNumOfDelaySD The number of one way times from source to destination that are
successfully measured. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.22 |
| hwNqaStatResMinDelaySD The minimum one way times from source to destination. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.23 |
| hwNqaStatResMaxDelaySD The maximum one way times from source to destination. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.24 |
| hwNqaStatResSumDelaySD The sum of one way times from source to destination. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.25 |
| hwNqaStatResSum2DelaySD The sum of squares of one way times from source to destination. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.26 |
| hwNqaStatResNumOfDelayDS The number of one way times from destination to source that are
successfully measured. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.27 |
| hwNqaStatResMinDelayDS The minimum one way times from destination to source. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.28 |
| hwNqaStatResMaxDelayDS The maximum one way times from destination to source. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.29 |
| hwNqaStatResIpTargetAddress This object represent the host address to be used at a remote host for
performing a network analysis operation. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.3 |
| hwNqaStatResSumDelayDS The sum of one way times from destination to source. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.30 |
| hwNqaStatResSum2DelayDS The sum of squares of one way times from destination to source. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.31 |
| hwNqaStatResMinRtt The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.4 |
| hwNqaStatResAverageRtt The average NQA probe round-trip-time (RTT). | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.6 |
| hwNqaStatResProbeResponses The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.7 |
| hwNqaStatResSentProbes The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent. | column | probes SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.8 |
| hwNqaStatResRttSumOfSquares This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received. | column | milliseconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.9 |