hwNqaResultsMaxDelayDS

A3COM-HUAWEI-NQA-MIB · .1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.9
MIB view Table view

Object

column milliseconds SNMPv2-SMIUnsigned32 
The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destination
system time is not valid, the DS delay may be set 0.

Context

MIB
A3COM-HUAWEI-NQA-MIB
OID
.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.9
Type
column
Access
readonly
Status
current
Units
milliseconds
Parent
hwNqaResultsEntry
Table
hwNqaResultsTable
Siblings
19

Syntax

milliseconds SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwNqaResultsRttNumDisconnects
The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.1
hwNqaResultsLostPacketRatio
The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent packets.
columnmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.10
hwNqaResultsPacketLateArrival
The value of this object indicates the number of the packets that arrived after the timeout.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.11
hwNqaResultsRttSum
The sum of round trip time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.12
hwNqaResultsNumOfDelaySD
The number of delay from source to destination that are successfully measured.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.13
hwNqaResultsMinDelaySD
The minimum of all one way times from source to destination.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.14
hwNqaResultsSumDelaySD
The sum of one way times from source to destination.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.15
hwNqaResultsSum2DelaySD
The sum of squares of one way times from source to destination.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.16
hwNqaResultsNumOfDelayDS
The number of delay from destination to source that are successfully measured.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.17
hwNqaResultsMinDelayDS
The minimum of all one way times from destination to source.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.18
hwNqaResultsSumDelayDS
The sum of one way times from destination to source.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.19
hwNqaResultsRttTimeouts
The number of times that a NQA probe failed because the probe timed out.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.2
hwNqaResultsSum2DelayDS
The sum of squares of one way times from destination to source.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.20
hwNqaResultsRttBusies
The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. The nex…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.3
hwNqaResultsRttNoConnections
The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.4
hwNqaResultsRttDrops
The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.5
hwNqaResultsRttSequenceErrors
The number of packets arrived out of sequence.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.6
hwNqaResultsRttStatsErrors
The number of some other errors.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.7
hwNqaResultsMaxDelaySD
The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In jitter test, if dest…
columnmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.8