hwNqaCtlFtpUsername
A3COM-HUAWEI-NQA-MIB ·
.1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.9
Object
column
r/w
OctetString
Ftp username.
Context
- MIB
- A3COM-HUAWEI-NQA-MIB
- OID
.1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwNqaCtlEntry
- Table
- hwNqaCtlTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwNqaCtlTargetPort The destination port that may be used by udpEcho,
tcpConnect and jitter probes. | column | Integer32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.1 |
| hwNqaCtlFtpPassword Ftp password. | column | OctetString | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.10 |
| hwNqaCtlFtpOperationString Ftp operation string. If the ftp operation type is get,
the string must be the file name which will be gotten from ftp server. | column | OctetString | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.11 |
| hwNqaCtlVPNInstance VPN name by which system finds route in the specified VPN
to send NQA probe packets. | column | OctetString | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.12 |
| hwNqaCtlHistoryKeptTime To indicate how long the history records will be saved
in the pingProbeHistoryTable table after the test stopped. | column | minutes Integer32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.13 |
| hwNqaCtlHistoryEnable To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded. | column | Enumeration | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.14 |
| hwNqaCtlICPIFAdvFactor The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.15 |
| hwNqaCtlCodecType To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe. | column | Enumeration | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.16 |
| hwNqaCtlSourcePort The source port that may be used by all tests except
for dns and dlsw.
If no source port is specified, system will create
a random port as source port. | column | Integer32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.2 |
| hwNqaCtlTTL Specifies the value to store in the TTL Field in the IP packet used to
encapsulate the NQA probe. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.3 |
| hwNqaCtlJitterAdminInterval Time value in milliseconds that is an interval between two continuous
probes in jitter test.
This object is only used by jitter test. | column | milliseconds Integer32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.4 |
| hwNqaCtlJitterAdminNumPackets Packet number that specifys how many packets will be sent in
one jitter test.
This object is only used by jitter test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.5 |
| hwNqaCtlHttpOperationType Http operation type: get or post. | column | Enumeration | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.6 |
| hwNqaCtlHttpOperationString Http operation string. For example, if the http operation type is get,
the string will be url, home page and http version. | column | OctetString | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.7 |
| hwNqaCtlFtpOperationType Ftp operation type. | column | Enumeration | .1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.8 |