hwMplsLdpCrlspTnlPeakBurstSize
A3COM-HUAWEI-MPLS-LDP-MIB ·
.1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.8
Object
column
r/w
bytes BurstSize
The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.
Context
- MIB
- A3COM-HUAWEI-MPLS-LDP-MIB
- OID
.1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bytes
- Parent
- hwMplsLdpCrlspTnlEntry
- Table
- hwMplsLdpCrlspTnlTable
- Siblings
- 14
Syntax
bytes BurstSize
- Source
- BurstSize
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsLdpCrlspTnlIndex Uniquely identifies this row. | column | MplsTunnelIndex | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.1 |
| hwMplsLdpCrlspTnlCommittedBurstSize The committed burst size - the committed burst size of the traffic
that will be handled in the established CRLSP. | column | bytes BurstSize | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.10 |
| hwMplsLdpCrlspTnlExcessBurstSize The Excess burst size - the excess burst size limit to be used
for traffic conditioning at the ingress of the CRLSP. | column | bytes BurstSize | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.11 |
| hwMplsLdpCrlspTnlIsPinned Indicates whether the loose-routed hops of this
tunnel are to be pinned. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.12 |
| hwMplsLdpCrlspTnlFrequency Indicates the frequency of usage of the established CRLSP. | column | Integer32 | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.13 |
| hwMplsLdpCrlspTnlWeight Indicates the weight that is the established CRLSP. | column | Integer32 | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.14 |
| hwMplsLdpCrlspTnlRowStatus For controlling the state of this row.
The status can be set to 'active' only when atleast one ERHOP
is created in the hwMplsLdpErHopTable, associated with this
tunnel. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.15 |
| hwMplsLdpCrlspTnlName The 'canonical' name assigned to the tunnel that can
be used to refer to it on the 'console' port. | column | DisplayString | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.2 |
| hwMplsLdpCrlspTnlDirection Whether this tunnel is unidirectional-incoming,
unidirectional-outgoing, or bidirectional. | column | Enumeration | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.3 |
| hwMplsLdpCrlspTnlSignallingProto The signaling protocol, if any, that set up this
tunnel. | column | Enumeration | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.4 |
| hwMplsLdpCrlspTnlSetupPrio The setup priority of this tunnel. | column | Integer32 | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.5 |
| hwMplsLdpCrlspTnlHoldingPrio The holding priority for this tunnel. | column | Integer32 | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.6 |
| hwMplsLdpCrlspTnlPeakDataRate The peak rate - the maximum rate at which traffic will be sent on the
CRLSP. | column | bits per second BitRate | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.7 |
| hwMplsLdpCrlspTnlCommittedDataRate The committed rate - the committed rate at which traffic will be sent on the
CRLSP. | column | bits per second BitRate | .1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.9 |