h3cIKETunRemoteValue2
A3COM-HUAWEI-IKE-MONITOR-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.8
Object
column
SNMPv2-TCDisplayString
The second specification of remote peer's IP address. If the remote peer type is single IP address or single name, then this is zero-length. If the remote peer type is IP subnet, then this is the value of the subnet mask. If the remote peer type is IP address range, then this is the value of ending IP address of the range.
Context
- MIB
- A3COM-HUAWEI-IKE-MONITOR-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- h3cIKETunnelEntry
- Table
- h3cIKETunnelTable
- Siblings
- 21
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cIKETunIndex The index of the IPSec Phase-1 IKE Tunnel Table.
The value of the index is a number which begins
at one and is incremented with each tunnel that
is created. The value of this obje… | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.1 |
| h3cIKETunInitiator The initiator of this tunnel. | column | Enumeration | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.10 |
| h3cIKETunNegoMode The negotiation mode of the IPSec Phase-1 IKE Tunnel. | column | H3cIKENegoMode | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.11 |
| h3cIKETunDiffHellmanGrp The Diffie Hellman Group used in the IPSec Phase-1 IKE
negotiations. | column | H3cDiffHellmanGrp | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.12 |
| h3cIKETunEncryptAlgo The encryption algorithm used in the IPSec Phase-1 IKE
negotiations. | column | H3cEncryptAlgo | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.13 |
| h3cIKETunHashAlgo The hash algorithm used in the IPSec Phase-1 IKE
negotiations. | column | H3cAuthAlgo | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.14 |
| h3cIKETunAuthMethod The authentication method used in the IPSec Phase-1
IKE negotiations. | column | H3cIKEAuthMethod | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.15 |
| h3cIKETunLifeTime The negotiated LifeTime of the IPSec Phase-1
IKE Tunnel in seconds. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.16 |
| h3cIKETunActiveTime The duration the IPSec Phase-1 IKE tunnel
has been active in seconds. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.17 |
| h3cIKETunRemainTime The security association remaining time in
seconds. | column | Integer32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.18 |
| h3cIKETunTotalRefreshes The total number of security association
refreshing performed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.19 |
| h3cIKETunLocalType The type of local peer identity. | column | H3cIKEIDType | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.2 |
| h3cIKETunState The State of IKE Tunnel. | column | H3cIKETunnelState | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.20 |
| h3cIKETunDpdIntervalTime The time that trigger DPD request.
If ipsec message is expected to be sent out
and the interval time between current time
and the last time receiving peer's IPSec
message is bigge… | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.21 |
| h3cIKETunDpdTimeOut The overtime of single DPD request.
If DPD requests are refused three times, all
security associations related would be deleted. | column | second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.22 |
| h3cIKETunLocalValue1 The value of the local peer identity.
If the local peer type is an IP Address,
then this is the IP Address used to identify
the local peer. If the local peer type is a
host name, … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.3 |
| h3cIKETunLocalValue2 The second specification of local peer's IP address.
If the local peer type is single IP address or
single name, then this is zero-length. If the local peer
type is IP subnet, the… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.4 |
| h3cIKETunLocalAddr The IP address of the local endpoint for the IPSec
Phase-1 IKE Tunnel. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.5 |
| h3cIKETunRemoteType The type of remote peer identity.
The remote peer may be identified
by: 1. an IP address, or 2. a host name. | column | H3cIKEIDType | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.6 |
| h3cIKETunRemoteValue1 The value of the remote peer identity. If the remote
peer type is an IP Address, then this is the IP Address
used to identify the remote peer. If the remote peer
type is a host na… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.7 |
| h3cIKETunRemoteAddr The IP address of the remote peer for the IPSec
Phase-1 IKE Tunnel. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.43.45.1.10.2.30.1.1.1.9 |