VPLS-GENERIC-DRAFT-01-MIB Table View

This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).

jnxVplsConfigEntry row .1.3.6.1.4.1.2636.5.8.1.2.1

A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
jnxVplsConfigIndex, which uniquely identifies a single VPLS.

A row is created by the operator or by t…

Indexes

jnxVplsConfigIndex

Column	Syntax	OID
jnxVplsConfigIndex Unique index for the conceptual row identifying a VPLS service.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.2636.5.8.1.2.1.1
jnxVplsConfigName A textual name of the VPLS. If there is no local name, or this object is otherwise not applicable, then this object MUST contain a zero-length octet string.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.8.1.2.1.2
jnxVplsConfigDescr A textual string containing information about the VPLS service. If there is no information for this VPLS service, then this object MUST contain a zero-length octet string.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.8.1.2.1.3
jnxVplsConfigAdminStatus The desired administrative state of the VPLS service. If the administrative status of the Vpls service is changed to enable then this service is able to utilize the pseudo wire to perform the tasks of a VPLS service. Th…	Enumeration Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.2636.5.8.1.2.1.4
jnxVplsConfigMacLearning This object specifies if MAC Learning is enabled in this service. If this object is true then Mac Learning is enabled. If false, then Mac Learning is disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.8.1.2.1.6
jnxVplsConfigDiscardUnknownDest If the value of this object is 'true', then frames received with an unknown destination MAC are discarded in this VPLS. If 'false', then the packets are processed.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.8.1.2.1.7
jnxVplsConfigMacAging If the value of this object is 'true' then the MAC ageing process is enabled in this VPLS. If 'false', then the MAC ageing process is disabled	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2636.5.8.1.2.1.8
jnxVplsConfigFwdFullHighWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the jnxVplsFwdFullAlarmRaised notification will be sent.	percentageUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2636.5.8.1.2.1.10
jnxVplsConfigFwdFullLowWatermark This object specifies the utilization of the forwarding database for this VPLS instance at which the jnxVplsFwdFullAlarmCleared notification will be sent.	percentageUnsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.2636.5.8.1.2.1.11
jnxVplsConfigRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.8.1.2.1.12
jnxVplsConfigMtu The value of this object specifies the MTU of this vpls instance.	Unsigned32 Constraints: range: 64-1518	.1.3.6.1.4.1.2636.5.8.1.2.1.13
jnxVplsConfigVpnId This objects indicates the IEEE 802-1990 VPN ID of the associated VPLS service.	VPN-TC-STD-MIBVPNIdOrZero Type Constraints: range: 0 range: 7	.1.3.6.1.4.1.2636.5.8.1.2.1.14
jnxVplsConfigServiceType The value of this object specifies the type of service emulated by this vpls instance.	Enumeration Enumerated Values: 1 vlan 2 ethernet	.1.3.6.1.4.1.2636.5.8.1.2.1.15
jnxVplsConfigStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.5.8.1.2.1.16

This table provides information for monitoring
Virtual Private Lan Services(VPLS).

jnxVplsStatusEntry row .1.3.6.1.4.1.2636.5.8.1.3.1

A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
jnxVplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically cre…

Indexes

jnxVplsConfigIndex

Column	Syntax	OID
jnxVplsStatusOperStatus The current operational state of this VPLS Service.	Enumeration Enumerated Values: 0 other 1 up 2 down	.1.3.6.1.4.1.2636.5.8.1.3.1.1
jnxVplsStatusPeerCount This objects specifies the number of peers present in this vpls instance.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.8.1.3.1.2

This table provides an association between a
VPLS service and the corresponding Pseudo
Wires. A service can have more than one Pseudo
Wire association. Pseudo Wires are defined in
the pwTable

jnxVplsPwBindEntry row .1.3.6.1.4.1.2636.5.8.1.4.1

Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the …

Indexes

jnxVplsConfigIndex jnxVplsPwBindIndex

Column	Syntax	OID
jnxVplsPwBindConfigType The value of this object indicates whether the Pseudo Wire binding was created manually or via autodiscovery. The value of this object must be specifed when the row is created and cannot be changed while …	Enumeration Enumerated Values: 1 manual 2 autodiscovery	.1.3.6.1.4.1.2636.5.8.1.4.1.1
jnxVplsPwBindType The value of this object indicates whether the Pseudo Wire binding is of type mesh or spoke. The value of this object must be specifed when the row is created and cannot be changed while the row status is…	Enumeration Enumerated Values: 1 mesh 2 spoke	.1.3.6.1.4.1.2636.5.8.1.4.1.2
jnxVplsPwBindRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.8.1.4.1.3
jnxVplsPwBindStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.5.8.1.4.1.4
jnxVplsPwBindIndex Secondary Index for the conceptual row identifying a pseudowire within the PwEntry which MUST match an entry from the PW-STD-MIB's PwTable which represents an already-provisioned pseudowire that is then associated with…	PwIndexType Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.2636.5.8.1.4.1.5

This table specifies information for configuring 
BGP Auto-discovery parameters for a given Vpls service.

jnxVplsBgpADConfigEntry row .1.3.6.1.4.1.2636.5.8.1.5.1

A row in this table represents BGP based autodiscovery
is in use for this instance of Vpls.
A row in this table is indexed by jnxVplsConfigIndex, which
uniquely identifies a single VPLS.
None of the read-create obj…

Indexes

jnxVplsConfigIndex

Column	Syntax	OID
jnxVplsBgpADConfigRouteDistinguisher The route distinguisher for this VPLS. See [RFC4364] for a complete definition of a route distinguisher. for more details on use of a route distinguisher for a VPLS service, see [RFC4761]	JnxVplsBgpRouteDistinguisher Type Constraints: range: 0..256	.1.3.6.1.4.1.2636.5.8.1.5.1.1
jnxVplsBgpADConfigPrefix In case of auto-discovery the default prefix advertised is the ip address of the loopback. In case the user wants to override the loopback address, jnxVplsBgpADConfigPrefix should be set. When this value if non-zero…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.8.1.5.1.2
jnxVplsBgpADConfigVplsId VplsId is a unique identifier for all VSIs belonging to the same VPLS. It is advertised as an extended community	JnxVplsBgpRouteDistinguisher Type Constraints: range: 0..256	.1.3.6.1.4.1.2636.5.8.1.5.1.3
jnxVplsBgpADConfigRowStatus For creating, modifying, and deleting this row. None of the read-create objects in the conceptual rows may be changed when this object is in the active(1) state.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.8.1.5.1.4

This table specifies the list of Route Targets 
imported or exported by BGP during auto-discovery of VPLS.

jnxVplsBgpRteTargetEntry row .1.3.6.1.4.1.2636.5.8.1.6.1

An entry in this table specifies the value of the
Route Target being used by BGP. Depending on the value
of jnxVplsBgpRteTargetType an RT might be exported or
imported or both. Every VPLS which
uses auto-discovery fo…

Indexes

jnxVplsConfigIndex jnxVplsBgpRteTargetIndex

Column	Syntax	OID
jnxVplsBgpRteTargetIndex This index along with jnxVplsConfigIndex,identifies one entry in the jnxVplsBgpRteTargetTable. By keeping jnxVplsConfigIndex constant and using new value of jnxVplsBgpRteTargetIndex user can configure multiple Route…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.5.8.1.6.1.1
jnxVplsBgpRteTargetRTType Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364].	JnxVplsBgpRouteTargetType Type Values: 1 import 2 export 3 both	.1.3.6.1.4.1.2636.5.8.1.6.1.2
jnxVplsBgpRteTargetRT The route target associated with the VPLS service. For more details on use of route targets for a VPLS service, see [RFC4761]	JnxVplsBgpRouteTarget Type Constraints: range: 0..256	.1.3.6.1.4.1.2636.5.8.1.6.1.3
jnxVplsBgpRteTargetRTRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.8.1.6.1.4