Dell-TRUNK-MIB Table View

An entry of this table specifies a balancing criterion used
for the corresponding dot3adAggIndex.

rlDot3adAggBalanceEntry row .1.3.6.1.4.1.89.65.2.1

A list of information for each dot3adAggIndex.

Indexes

IEEE8023-LAG-MIBdot3adAggIndex rlDot3adAggBalanceForwardType

Column	Syntax	OID
rlDot3adAggBalanceForwardType A Forwarding type: Bridging or Routing.	Enumeration Enumerated Values: 1 bridging 2 routing	.1.3.6.1.4.1.89.65.2.1.1
rlDot3adAggBalanceLayer A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.65.2.1.2
rlDot3adAggBalanceUsedAddresses Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).	Enumerationr/w Enumerated Values: 0 notApplied 1 dstAddr 2 srcAddr 3 dstAndSrcAddr 4 vlanId 5 ethType	.1.3.6.1.4.1.89.65.2.1.3
rlDot3adAggBalanceBroadcastType Specifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames too dedicated: a link allocated f…	Enumerationr/w Enumerated Values: 0 common 1 dedicated	.1.3.6.1.4.1.89.65.2.1.4

An entry of this table is for creation of an aggregator
for the corresponding dot3adAggIndex, when the value of the
rlDot3adAggCreationSupport is diffrent from notSupported.

rlDot3adAggCreationEntry row .1.3.6.1.4.1.89.65.6.1

An information for each dot3adAggIndex.

Indexes

IEEE8023-LAG-MIBdot3adAggIndex

Column	Syntax	OID
rlDot3adAggCreationTrunk The aggregator can aggregate ports in manual configuration.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.65.6.1.1
rlDot3adAggCreationLacp The aggregator can aggregate ports by lacp.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.65.6.1.2

An entry of this table specifies lacp protocol state and
statistics for the corresponding dot3adAggPortIndex.

rlDot3adAggPortLacpEntry row .1.3.6.1.4.1.89.65.8.1

A list of information for each dot3adAggPortIndex.

Indexes

IEEE8023-LAG-MIBdot3adAggPortIndex

Column	Syntax	OID
rlDot3adAggPortLacpPdusRx The number of valid LACPDUs received on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.65.8.1.1
rlDot3adAggPortLacpPDUsTx The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.65.8.1.2
rlDot3adAggPortLacpRxState This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state ma…	Enumeration Enumerated Values: 1 current 2 expired 3 defaulted 4 initialize 5 portDisabled 6 lacpDisabled	.1.3.6.1.4.1.89.65.8.1.3
rlDot3adAggPortLacpMuxState This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for t…	Enumeration Enumerated Values: 1 detached 2 waiting 3 attached 4 collecting 5 distributing 6 collectingDistributing	.1.3.6.1.4.1.89.65.8.1.4
rlDot3adAggPortLacpPeriodicState This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if th…	Enumeration Enumerated Values: 1 noPeriodic 2 fastPeriodic 3 slowPeriodic 4 periodicTx	.1.3.6.1.4.1.89.65.8.1.5
rlDot3adAggPortLacpSelected This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Se…	Enumeration Enumerated Values: 1 unselected 2 selected 3 waiting	.1.3.6.1.4.1.89.65.8.1.6
rlDot3adAggPortLacpReady A read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'). otherwise, its valus is 'FALSE'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.65.8.1.7
rlDot3adAggPortLacpPortMoved A read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming LACPDU ('TRUE'). otherwise, its valus is 'FALSE'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.65.8.1.8
rlDot3adAggPortLacpNNT A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.65.8.1.9
rlDot3adAggPortLacpPeriodicTxTimer The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.65.8.1.10
rlDot3adAggPortLacpCurrentWhileTimer The amount of time in seconds remaining before the Current While timer will expire. This value is read-only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.65.8.1.11
rlDot3adAggPortLacpWaitWhileTimer The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.65.8.1.12

An entry of this table specifies membership restrictions
for ports that lacp is enbaled on them, and try to attach to
the corresponding dot3adAggIndex.

rlDot3adAggLacpMembershipRestrictionsEntry row .1.3.6.1.4.1.89.65.10.1

A list of information for each dot3adAggIndex.

Indexes

IEEE8023-LAG-MIBdot3adAggIndex

Column	Syntax	OID
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.65.10.1.1
rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.89.65.10.1.2
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set.	SNMPv2-TCPhysAddressr/w Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.89.65.10.1.3
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.65.10.1.4
rlDot3adAggLacpMembershipRestrictionsIndividualAggregator This variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE').	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.65.10.1.5